Configuring Systems for Terminals, Printers, and Other Serial Devices (32022-90051)

Chapter 7 125
Terminal and Printer Profiles
Terminal Switching Configuration Screen
Terminal Switching Configuration Screen
Figure 7-3 displays the Terminal Switching Configuration screen. You
can reach this screen by pressing [F5], the [Go To Switch] function key,
at the Terminal Profile screen. The Terminal Switching Configuration
screen allows you to configure host-based terminal switching
parameters.
Path name: DTS.PROFILE.profname.SWITCH
Figure 7-3 Terminal Switching Configuration Screen
Review the profile settings on the screen. Use the
[Tab] key to move
from field to field. Make changes as needed by typing over the current
values. When you have made the desired changes, press the
[Save Data]
key. Refer to the “Fields” subsection for detailed information about each
field on the screen.
Press the [Prior Screen] key to return to the Terminal Profile screen.
Fields Terminal name
Optional field which specifies the terminal port name.
You may enter up to 16 characters or an IP address. For
routable back-to-back environments, this field must
contain a valid IP address for the terminal port in the
format xxx.xxx.xxx.xxx, where xxx is a number
from 0–255.