Communicator e3000 MPE/iX Release 6.0 Express 1 (C.60.01) (30216-90286)

56 Chapter3
Technical Articles
Legato 3000 NetWorker Storage Node for MPE/iX
Configuring the Storage Node on the NetWorker Server
Complete the configuration process on the Storage Node on the NetWorker server.
Verify the ldev Specifications
io> ldev 30/34
LDEV: 30 DEVNAME: OUTDEV: 0 MODE:
ID: HPC1194F RSIZE: 128 DEVTYPE: MOSAR_AC
PATH: 10/4/4.0.0 MPETYPE: 24 MPESUBTYPE: 4
CLASS:
LDEV: 31 DEVNAME: OUTDEV: 0 MODE:
ID: DLT7000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.1.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
...
LDEV: 34 DEVNAME: OUTDEV: 0 MODE:
ID: DLT7000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.4.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
Save the Configuration Changes
Hold the configuration changes:
io> hold
Exit the io section:
io> exit
If you have followed the local convention for backing up the configuration file, keep the
changes:
sysgen> keep
keeping to group CONFIG.SYS
Purge old configuration (yes/no)?y
IMPORTANT
Check with system management to make sure you can keep the changes to
the configuration file.
Exit sysgen and reboot according to local convention:
sysgen> exit