Communicator e3000 MPE/iX Release 6.0 Express 1 (C.60.01) (30216-90286)

Chapter 3 55
Technical Articles
Legato 3000 NetWorker Storage Node for MPE/iX
Step 4. If not already configured, configure the differential card and the pseudo/target
level of the SCSI path:
io> apath 10/4/4 id=HP28696A
io> apath 10/4/4.0 id=pseudo
io> apath 10/4/4.1 id=pseudo
io> apath 10/4/4.2 id=pseudo
io> apath 10/4/4.3 id=pseudo
io> apath 10/4/4.4 id=pseudo
Step 5. Configure the robotic transport/”picker” and DLT tape drives:
io> adev 30 id=HPC1194F path=10/4/4.0.0
io> adev 31 id=DLT7000 path=10/4/4.1.0 mode=autoreply
io> adev 32 id=DLT7000 path=10/4/4.2.0 mode=autoreply
io> adev 33 id=DLT7000 path=10/4/4.3.0 mode=autoreply
io> adev 34 id=DLT7000 path=10/4/4.4.0 mode=autoreply
Step 6. Verify the bindings between the PATH, LDEV number, ID, PMGR (device
drivers), and LMGR attributes for each device configured.
• Verify the binding for the device adapter (the fw/differential dam):
io> lpath 10/4/4.0.0
PATH: 10/4/4 LDEV:
ID: HP28696A TYPE: DA
PMGR: FWSCSI_DAM PMGRPRI: 6
LMGR: MAXIOS: 0
Repeat this verification step for lpath 10/4/4.1, 4.2, 4.3, and 4.4.
• Verify the binding for the targets (the transparent dm):
io> lpath 10/4/4.0
PATH: 10/4/4.0 LDEV:
ID: PSEUDO TYPE: DA
PMGR: TRANSPARENT_MGR PMGRPRI: 6
LMGR: MAXIOS: 0
Repeat this verification step for lpath 10/4/4.1, 4.2, 4.3, and 4.4.
• Verify the binding for the picker (the pass-through driver):
io> lpath 10/4/4.0.0
PATH: 10/4/4.0.0 LDEV: 30
ID: HPC1194F TYPE: MOSAR_AC
PMGR: MO_SCSI_PTHRU_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
Repeat this verification step for lpath 10/4/4.1, 4.2, 4.3, and 4.4.
• Verify the binding for the tape drives (the differential tape dm):
io> lpath 10/4/4.1.0
PATH: 10/4/4.1.0 LDEV: 31
ID: DLT7000 TYPE: TAPE
PMGR: SCSI_TAPE2_DM PMGRPRI: 10
LMGR: LOGICAL_DEVICE_MANAGER MAXIOS: 0
Repeat this verification step for lpath 10/4/4.2.0, 4.3.0, and 4.4.0.