APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

227
C Configuration Worksheets
The worksheets in this appendix are provided to help you plan your
APPC subsystem configuration. Before you fill them out, you should
read Chapter 4 , “APPC Subsystem Configuration.”
At the beginning of Chapter 4 , “APPC Subsystem Configuration,” is a
section called “Data Required from the Remote Configuration.” You will
need the information listed in that section to complete the configuration
worksheets.
NOTE You must configure all the SNA nodes and LUs you will use before you
configure the APPC subsystem. SNA node configuration is described in
the SNA Link/XL Node Manager’s Guide.
This appendix contains the following:
• The “Completing the Worksheets” section gives step-by-step
instructions for filling out the Independent LU Session Types
worksheet, the Dependent LU Session Types worksheet, and the
Mode Types worksheet.
• The “Example Worksheets” are completed worksheets for the
example configuration described in Appendix B , “Sample
Configuration.”
• One copy of the Independent LU Session Types worksheet, one
copy of the Dependent LU Session Types worksheet, and one copy
of the Mode Types worksheet are included at the end of this
appendix.
Make some photocopies of the worksheets before you start filling them
out so you will have enough room to plan your whole configuration.