Hardware Reference Manual

Rear panel components
For more information, go to http://www.hp.com and search for your specific digital signage player
model to find the model-specific QuickSpecs.
Figure 1-2 HP MP4 Digital Signage Player rear panel components
(1) DVI-I connector for DVI-D and VGA output (6) Serial connector
(2) DisplayPort connector (7) PS/2 connectors (2)
(3) Ethernet RJ-45 connector (8) Power cord retention slot
(4) Universal serial bus (USB) connectors (2) 2.0 (9) Cable lock slot
(5) Universal serial bus (USB) connectors (2) 3.0 (10) Power connector
Installing the rubber feet
CAUTION: To prevent loss of performance or damage to the digital signage player, be sure to
install the rubber feet before operating the digital signage player in a horizontal orientation.
To install the rubber feet:
1. As you face the front of the digital signage player, lay the digital signage player on its left side.
2. Remove the feet from their backing.
2 Chapter 1 Product features