Manualshelf

Hardware Reference Manual

ManualsBrandsHP ManualsPoint of Sale SystemsHP MP4 Digital Signage Player
21222324252627282930
To use the HP Quick Release with a VESA-configured digital signage player:
1. Using four 15 mm screws included in the mounting device kit, attach one side of the HP Quick
Release to the digital signage player as shown in the following illustration.
Figure C-2 Connecting the HP Quick Release to the digital signage player
2. Using four screws included in the mounting device kit, attach the other side of the HP Quick
Release to the device to which you will mount the digital signage player. Make sure the release
lever points upward.
Figure C-3 Connecting the HP Quick Release to another device
22 Appendix C Mounting the digital signage player