StorageWorks Modular Smart Array 500 System Maintenance and Service Guide
Table Of Contents
- HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Removal and Replacement Procedures
- Safety Considerations
- System Power Down
- Hard Drive Blank
- Hot-Plug SCSI Hard Drive
- Universal Hot-Plug Tape Drive
- Bezel Blank
- HP StorageWorks Modular Smart Array 500 Controller
- Battery-Backed Cache Module
- Blower
- Hot-Plug Power Supply
- 2-Port and 4-Port Shared Storage Modules
- Interconnect Blank
- Power Button/LED Assembly
- MSA500 System Chassis and Backplane
- Chapter 3: Diagnostic Tools
- Chapter 4: Component Identification
- Front Panel Components
- Enclosure LEDs
- Rear Panel Components
- Power Supply/Blower Assembly LEDs
- 2-Port Shared Storage Module Components
- 2-Port Shared Storage Module LEDs
- 4-Port Shared Storage Module Components
- 4-Port Shared Storage Module LEDs
- Controller Components
- SCSI IDs
- Hot-Plug SCSI Hard Drive LEDs
- Hot-Plug SCSI Hard Drive LED Combinations
- Chapter 5: Specifications
- Index
Specifications
5-2 HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide
Table 5-1: System Unit Specifications continued
Specification Value
Relative humidity (noncondensing)
Operating 10% to 90%
Nonoperating up to 95%
Maximum wet bulb temperature
Long-term storage
29°C (84.2°F)
Short term storage
30°C (86°F)
Memory
Table 5-2: SDRAM DIMM Specifications
Specification Value
Speed 100 MHz minimum
Width 80 bits
Note: Use only HP battery-backed cache modules.
2-Port and 4-Port Shared Storage Modules
Table 5-3: 2-Port and 4-Port Shared Storage Module
Specifications
Specification Value
Height 11.4 cm (4.5 in)
Width 3.5 cm (1.38 in)
Depth 24.1 cm (9.5 in)
Weight 0.6 kg (1.3 lb)