HP StorageWorks Modular Smart Array 500 System User Guide

Cluster Installation and Configuration
5-2 HP StorageWorks Modular Smart Array 500 System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration.doc
Codename: Aurora Part Number: 240333-004 Last Saved On: 10/6/03 2:01 PM
b. Connect the VHDCI SCSI cables to the storage system and servers.
For Microsoft or Linux operating systems, connect the Ethernet crossover
cable between the servers. Use the RJ-45 connectors identified as NIC 1 on
each server.
c. Connect peripheral devices, such as a keyboard, mouse, or monitor.
IMPORTANT: HP recommends the use of a KVM switchbox. Refer to the documentation
that ships with the switchbox.
6. Connect the power cords.
IMPORTANT: HP recommends the use of an uninterruptible power supply (UPS).
Contact the nearest authorized reseller.
7. Depending on the operating system, use the appropriate installation instructions
provided on the HP website:
http://www.hp.com/servers/proliant/highavailability