HP StorageWorks Modular Smart Array 500 System User Guide

Hardware Options Installation
3-6 HP StorageWorks Modular Smart Array 500 System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: d-ch3 Hardware Options Installation.doc
Codename: Aurora Part Number: 240333-004 Last Saved On: 10/6/03 1:53 PM
2. Install the tape drive height converter on the tape drive.
NOTE: Hot-plug tape drives have a 1.6-inch form factor. Most hot-plug drive cages have
a 1-inch spacing between drive slots. When placing a 1.6-inch tape drive into a cage that
has 1-inch spacing, you must completely fill two slots in the drive cage to maintain proper
airflow. The drive height converter fills the remaining 0.4-inch.