HP Smart Array Cluster Storage System

Cluster Installation and Configuration
HP Smart Array Cluster Storage System User Guide 5-17
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
Creating Novell Storage Service Volumes
To create Novell Storage Service (NSS) volumes to be used in the cluster:
1. From the system console, type
NWCONFIG
2. Select NSS Disk Options, Storage, Assign Ownership.
3. Select one LUN (logical unit) at a time and then select Yes to initialize.
4. Repeat steps 2 and 3 for each shared LUN.
5. From the system console, type
NWCONFIG
6. Select NSS Disk Options, NSS Volume Options, Create, NSS Volume.
7. Select a LUN and give the LUN a name.
8. Select Yes.
NOTE: You should receive a message:
Successfully created the new NSS Volume and added it to NDS.
9. Repeat steps 7 and 8 for each LUN.
To configure the second server to see the NSS volumes:
1. From the second server system console, type
NWCONFIG
2. Select NSS Disk Options, Storage, Update Provider Information.
3. Update both the GSEG (Group/Segment Manager) and the MMPRV (NSS Media
Manager Provider).
4. Exit the utility.
5. Verify that each server sees the volumes. From the command console of each
server, type
NSS volumes