HP Smart Array Cluster Storage System

Cluster Installation and Configuration
HP Smart Array Cluster Storage System User Guide 5-15
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
c. Select Product Options, Install a Product Not Listed.
d. Enter the appropriate path and launch the Support Pack installation.
7. Repeat steps 2 through 6 for the second server.
Configuring the Storage System
To configure the storage system:
1. Power down the second server.
2. From the first server, run CPQONLIN.NLM. (NetWare Online Array
Configuration Utility). Refer to Chapter 4, “Configuration and Utilities.”
3. Select the Smart Array Cluster Controller to configure the storage system hard
drives. Refer to the HP Array Configuration Utility User Guide on the
Documentation CD.
Configuring NetWare Cluster Services
Cluster Prerequisites
Before installing NetWare Cluster Services, verify that NetWare recognizes all the
drives in the storage system by running the List Devices command on each
server to be added to the cluster.
If any of the drives in the storage system are not displayed in the list, consult the
NetWare documentation or the storage system documentation for troubleshooting
information.
NetWare Cluster Services Installation
The NWCS installation creates a new cluster object and installs NWCS software on
the servers specified as part of the cluster. This installation is performed from a
remote client workstation machine.