HP Smart Array Cluster Storage System

Cluster Installation and Configuration
5-12 HP Smart Array Cluster Storage System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
Novell NetWare 5.1 Setup and Configuration
Use the procedures in this section to set up and configure the cluster with Novell
NetWare 5.1 operating system.
Configuring the Cluster
Preconfiguration Checks
Be sure that the following items are available for configuring the cluster:
• SmartStart CD 6.1 or later
• Novell NetWare 5.1 software and documentation
• NetWare 5.1 Support Pack 5 or later
• NetWare Cluster Services (NWCS) for NetWare 5.1 software and documentation
• NetWare Cluster Services 1.01 Support Pack 4 or later
Before configuring the cluster:
• Be sure you have sufficient software rights and licenses to install the operating
system and software applications on each server.
• Be sure all hardware is installed and cabled properly.
Preparing for Operating System Installation
Before installing the operating system, gather the following information:
• Server A
— Name
— Administrator name, context, and password (used during operating system
installation)
— Public network connection IP address and subnet mask