HP Smart Array Cluster Storage System

Display Messages
HP Smart Array Cluster Storage System User Guide C-27
COMPAQ CONFIDENTIAL
Writer: Rob Weaver File Name: i-appc Display Messages
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/8/02 3:50 PM
Table C-1: Display Messages continued
Message Type Description Action
109 VOLUME #<n>
STATE WRONG
DRIVE REPLACED
Error The controller recognizes
drive replacement on
working physical drives
rather than failed drives.
1. Power down the Smart
Array Cluster Storage
system.
2. Reinstall the working
drives.
3. Replace the failed
drives.
4. Power up the Smart
Array Cluster Storage
system.
110 VOLUME #<n>
EXPANSION
DISABLED
Informational The controller disabled
volume expansion
operation on the
configured volume. This
condition can result from
the following:
• An ongoing rebuild
operation
• Another expansion
operation
• Disabled cache
memory caused by
a low battery
The expansion resumes
after the condition has
been cleared.
Wait for the current
operation to finish.
If the condition does not
change, replace the cache
module.
111 VOLUME #<n>
INITIALIZING
PARITY
Informational The array controller is
calculating and storing
parity information for the
configured volume and
performance may be
lower until this operation
is complete.
—
continued