HP Smart Array Cluster Storage System

Regulatory Compliance Notices
A-6 HP Smart Array Cluster Storage System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: g-appa Regulatory Compliance Notices
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/8/02 3:39 PM
WARNING:
Use of controls or adjustments or performance of procedures
other than those specified herein or in the laser product’s installation guide
may result in hazardous radiation exposure. To reduce the risk of exposure
to hazardous radiation:
• Do not try to open the unit enclosure. No user-serviceable components are
inside.
• Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
• Allow only HP Authorized Service technicians to repair.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States. This device is classified as a
Class 1 laser product as defined by IEC 825.
This indicates that the product is classified as a
CLASS 1 LASER PRODUCT.
Battery Replacement Notice
The Smart Array Cluster Storage system is provided with Lithium Manganese
Dioxide or Vanadium Pentoxide batteries. A danger of explosion and risk of personal
injury exists if the array is incorrectly replaced or mistreated. Replace only with the
HP spare designated for this product. For more information about battery
replacement or proper disposal, contact an authorized reseller or an Authorized
Service Provider.