CLI Reference Guide

122
show disks
Description Shows information about all disks in the storage system. If no parameter is specified, the command
shows information for all disks.
Syntax
show disks [disks|free|all|encl][vdisk vdisk]
Parameters disks|free|all|encl
Optional. Specifies the disks to report information about:
• disks: IDs of the disks to show information about. For syntax, see Command syntax.
• free: Shows information about all disks that are available.
• all: Shows information about all disks.
• encl: Shows information about all disks by enclosure. This option shows different fields than the
other options and shows each disk slot, whether it contains a disk or not.
vdisk vdisk
Shows information for disks in the specified vdisk. For syntax, see Command syntax.
Output Without the encl option:
Location
Disk's enclosure and slot number
Serial Number
Disk serial number
Vendor
Disk vendor
Rev
Firmware revision number
How Used
• AVAIL: Available
• GLOBAL SP: Global spare
• LEFTOVR: Leftover
• VDISK: Used in a vdisk
• VDISK SP: Spare assigned to a vdisk
Any jobs running on the disk or its vdisk follow the state value:
• DRSC: The disk is being scrubbed
• EXPD: The vdisk is being expanded
• INIT: The vdisk is being initialized
• LOWF: A low-level format is in progress
• RCON: The vdisk is being reconstructed
• VRFY: The vdisk is being verified
• VRSC: The vdisk is being scrubbed
Type
• SAS: Dual-port SAS
• SAS-S: Single-port SAS
• SATA: Dual-port SATA
• SATA-S: Single-port SATA
Size
Disk capacity