Technical data

Configuration
Graphics Configuration
3-31
==== CONSOLE PATH ============================
CONSOLE PATH is now [ GRAPHICS 1 ]
Key Device Path
--- -----------------------------------------
1 GRAPHICS 1
2 RS-232 (A)
3 Null Device
4 RS-232 (B)
... .........................................
0 Previous Menu
66 Rescan for console devices
77 Reset the System
----------------------------------------------
To set the CONSOLE PATH, Press Key, then press
[Enter/Return]
3 The Console Path menu lists the graphics as GRAPHICS 1, GRAPHICS 2, etc., up to
the number installed in the system. To choose a specific resolution for the console mon-
itor, press the key number opposite the graphics location where the monitor is connect-
ed. The Console Path Monitor Type menu displays. At the top of the menu, the current
Console Path and its graphic connection is displayed as CONSOLE PATH is
[GRAPHICS n} where “n” is the connector number.
==== CONSOLE PATH MONITOR TYPE ===============
CONSOLE PATH is [ GRAPHICS 1 ] Type is Key 1
Key Resolution Hz Style
--- -----------------------------------------
1 * 1280 by 1024 72
2 1024 by 768 75
3 1024 by 768 70
4 1024 by 768 75 Flat Panel
5 1280 by 1024 60
6 1024 by 768 60
7 640 by 480 60
8 1280 by 1024 75 VESA
9 1024 by 768 75 VESA
10 800 by 600 75 VESA
11 640 by 480 75 VESA
12 1280 by 1024 72
13 1280 by 1024 50
Key Operation
... .........................................
55 SAVE any changes and goto Previous Menu
----------------------------------------------
To select a Type, press Key, then press [Enter/Re-
turn]