Technical data

Configuration
Graphics Configuration
3-30
To change or view the EEPROM graphics configurations:
1 Select Path Configuration from the Main menu by pressing:
2 Enter
The system displays the Path Configuration menu, as shown:
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [ SCSI.6.0 ]
ALTERNATE PATH is now [ LAN.090009-723333 ]
CONSOLE PATH is now [ RS-232 (A) ]
KEYBOARD PATH is now [ PS/2 (0) ]
Key Operation
--- -----------------------------------------
1 Primary Boot Path
2 Alternate Boot Path
3 Console Path
4 Keyboard Path
... .........................................
0 Previous Menu
77 Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
2 Select the Console Path menu by pressing 3
Enter
The system displays a Console Path menu, similar to the following:
HCRX board and on-
board graphics
On-board graphics, GRAPHICS 1
HCRX board, GRAPHICS 2
HCRX board and HP
A4267A card (no on-
board graphics)
HCRX board, GRAPHICS 1
HP A4267A card, GRAPHICS 2
HCRX board and HP
A4267A card and on-
board graphics
On-board graphics, GRAPHICS 1
HCRX board, GRAPHICS 2
HP A4267A card, GRAPHICS 3
Table 3-6 Graphics Sub-System Combinations
Graphics Configuration Boot Console Menu Label