Technical data

Configuration
Path Configuration Menu
3-9
Path Configuration Menu
The Primary and Alternate Path menus also performs a search for bootable devices. To
access the Path Configuration menu, enter the following from the Main Menu:
2 Enter
The system displays the Path Configuration menu, as shown:
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [ SCSI.6.0 ]
ALTERNATE PATH is now [ LAN.090009-723333 ]
CONSOLE PATH is now [ RS-232 (A) ]
KEYBOARD PATH is now [ PS/2 (0) ]
Key Operation
--- -----------------------------------------
1 Primary Boot Path
2 Alternate Boot Path
3 Console Path
4 Keyboard Path
... .........................................
0 Previous Menu
77 Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
The Path Configuration menu shows the current values of the Primary, Alternate, Console
and Keyboard paths and allows you to select which path to change.
Paths are used as a means of storing the address information of a specific device. This
stored description may be used later to locate a bootable device, a console or a keyboard.
The names of these paths may be thought of as the names of areas in the system EEPROM
used to store information needed by programs to locate a specific device.
Table 3-2 lists the paths recognized by the firmware.