Technical data

Field Replaceable Units
Removing and Replacing the GSC Adapter
5-17
Removing and Replacing the GSC Adapter
This section provides step-by-step instructions for replacing the GSC adapter (Expansion
Kit) in your Model 743.
Preliminary Requirements
Perform the following steps before removing the GSC adapter (Expansion Kit) from your
Model 743:
1 Remove the 743 from it’s chassis. (Removing and Replacing the 743 Board Computer,
page 5-9 .)
2 Remove any GSC cards. (Removing and Replacing GSC Graphics/FWD SCSI cards.)
Removal and Replacement
Follow these steps to remove the adapter from your Model 743:
1 Remove the two M2.5X6 screws from the bottom of the system board as shown in Fig-
ure 5-5.