User's Manual

ENWW Add a printer 35
 To specify the printer to use
1 In the Specify Bluetooth Printer screen, use the drop-down boxes to
select the printer manufacturer and model.
2 Select the COM port that was associated with the printer during the
setup procedure. The default COM port is 8.
To change the Bluetooth COM port setting, go to the Configuration
screen and tap the System tab.
3 When you add a printer, you have to give it a name. The name
should be unique and easily identifiable.
Enter the printer name in the My printer’s name box. When you tap
this field, a keyboard will appear. Use the keyboard to enter the
required text, and then tap the keyboard icon
on the command
bar to remove the keyboard from the screen.
Select the following check boxes as needed:
 Tap the Enable raw file type check box if you want to send an
unprocessed file (such as a postscript or pdf) directly to the
printer.
 Tap the Set as default printer check box if you want to make the
current printer your default printer.
To print a test page, tap Print Test Page.
Tap Finish to add the printer to the printer list.