Specifications

Diagnostic Tools
To make selections within RBSU, use the following keys:
•
•
•
•
•
Access RBSU by pressing the F9 key when prompted during startup.
Use the arrow keys navigate through the menu system.
Make selections by pressing the Enter key.
Cancel selections by pressing the Esc key.
Save selections and changes by pressing the F10 key.
For information on RBSU not found in this guide, refer to the HP ROM-Based Setup Utility
User Guide on the Documentation CD.
ROMPaq
Flash ROM enables you to upgrade the firmware (BIOS) with system or option ROMPaq
utilities. To upgrade the BIOS, insert a ROMPaq diskette into the diskette drive and boot the
system.
The ROMPaq utility checks the system and provides a choice (if more than one exists) of
available ROM revisions. This procedure is the same for both system and option ROMPaq
utilities.
CAUTION: Do not power down during a firmware upgrade. A loss of power during upgrade
may corrupt the firmware and prevent the server from starting.
For more information about the ROMPaq utility, refer to the HP website
(
www.hp.com/servers/manage).
SmartStart Software
The SmartStart CD is used to load the server software, thereby achieving a well-integrated
server and ensuring maximum dependability and supportability. The SmartStart CD contains
diagnostic utilities and ROMPaq tools.
SmartStart software enables you to:
•
•
•
•
•
Install selected server operating systems using packaged product CDs.
Install the latest optimized drivers.
Test server hardware using the new Enterprise Diagnostics LX32 Utility.
Update the latest system or option ROM using the ROM Update Utility.
Install software drivers directly from the CD. With systems that have internet connection,
the SmartStart Autorun Menu provides access to the complete list of ProLiant System
Software on the website.
3-4 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide