Specifications

Diagnostic Tools
Management Agents
The server is equipped with the latest Management Agents, allowing easy manageability of
the server through Insight Manager 7 software, and third-party SNMP management
platforms. Management agents monitor key subsystems that are instrumental in making
health, configuration, and performance data available to the agent software. The agents act
upon that data by initiating alarms in the event of faults. The agents also provide updated
management information, such as network interface or subsystem performance statistics, to
the management systems.
For additional information, refer to the Management CD in the HP ProLiant Essentials
Foundation Pack or refer to the HP website (
www.hp.com/servers/manage).
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical
drive, assign RAID levels, and establish online spare configurations.
The utility provides support for the following functions:
•
•
•
•
•
•
•
Configuring one or more logical drives using physical drives on one or more SCSI buses
Viewing the current logical drive configuration
Deleting a logical drive configuration
If you do not use the utility, ORCA will default to the standard configuration.
For more information about array controller configuration, refer to the HP ROM-Based Setup
Utility User Guide on the Documentation CD.
Power-On Self-Test
POST is a series of diagnostic tests that checks firmware and assemblies to ensure that the
server is functioning properly. This utility runs automatically every time the server is
powered up.
For the normal power-up sequence and diagnosis of problems encountered during POST,
refer to the setup and installation guide.
ROM-Based Setup Utility
RBSU performs a wide range of configuration activities, including the following:
Configuring server devices and installed options
Viewing server information
Selecting the operating system
Selecting the primary boot controller
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 3-3