Specifications

Diagnostic Tools
• Multiple drive rebuilding
•
•
•
•
•
•
•
•
•
•
•
Special handling of error log, spare drive, and rebuilding
After all hard drives have been installed and connected, press the F8 key during startup to run
the Integrated ATA RAID Configuration Utility and view the setup screen. ROM will
automatically configure drives to RAID 0 if you do not run the F8 utility.
To turn off the Integrated ATA RAID Management:
In Microsoft operating systems, right-click on the tray icon and select Quit Spy.
In Novell operating systems, enter
Unload Spy at the console.
In Linux operating systems, enter
Spy-Stop at the prompt.
Turning off this utility turns off the ability for online spares to be rebuilt if a drive failure
occurs. You need to power up the server and rebuild the spare in the RAID Configuration
Utility by pressing the F8 key.
To turn on the Integrated ATA RAID Configuration Utility:
In Microsoft operating systems, power up the server or log off the server and then log
back on.
In Novell operating systems, enter
Load Spy at the console.
In Linux operating systems, enter
Spy-Start at the prompt.
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML time
stamps each event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
From within Insight Manager 7
From within Survey Utility
From within operating system-specific IML viewers
— For NetWare: IML Viewer
— For Windows: Event Viewer or IML Viewer
— For Linux: IML Viewer Application
From within Enterprise Diagnostics LX32 Utility
For more information, refer to the HP Servers Troubleshooting Guide on the Documentation
CD, or the Management CD in the HP ProLiant Essentials Foundation Pack.
3-2 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide