QuickSpecs

Table 6. Smart Array Controllers requiring additional configuration when used as the boot controller
Serial controllers Parallel SCSI controllers Retired controllers
Smart Array P600 Smart Array 6404 Integrated Smart Array Controller
Smart Array P400 Smart Array 6402 Smart Array 5i
Smart Array P400i Smart Array 642 Smart Array 532
Smart Array 641 Smart Array 5300
Smart Array 6i Smart Array 5312
NOTE
Alternatively, you may set your array controller as the
secondary controller and install the OS to a SCSI controller.
Once the OS is installed, configure the array through the Array
Configuration Utility (ACU) using the PSP for Microsoft
Windows Server 2003 R2 Version 7.50A.
5. Insert the Windows Server 2003 R2 CD into CD-ROM drive to begin installation.
6. After Windows Server 2003 R2 has been installed, install the Simple Network Management
Protocol (SNMP), if you want to use the functionality of the ProLiant Management Agents.
a. Select the Control Panel from the Start menu.
b. Select Add/Remove Programs.
c. Click Add/Remove Windows Components.
d. Select Management and Monitoring Tools from the list of components.
e. Click Details.
f. Select Simple Network Management Protocol so that a checkmark is displayed in the
checkbox.
g. Click OK and then Next.
h. Click Finish.
12