Mini User Guide
© Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Getting started Using HP QuickWeb (select models only) ............................................................................................ 2 2 Knowing the parts Identifying the hardware ....................................................................................................................... 3 Top components .................................................................................................................. 3 TouchPad .................................
Managing low battery levels .............................................................................................. 21 Identifying low battery levels ............................................................................. 21 Resolving a low battery level ............................................................................. 22 Resolving a low battery level when external power is available ....... 22 Resolving a low battery level when a charged battery is available .......................
Using preinstalled multimedia software ............................................................................. 46 Installing multimedia software from the Internet ................................................................ 46 Audio .................................................................................................................................................. 47 Connecting external audio devices ....................................................................................
11 Memory modules 12 Updating software Updating the BIOS ............................................................................................................................. 73 Determining the BIOS version ........................................................................................... 73 Downloading a BIOS update ............................................................................................. 73 Updating programs and drivers .................................................
1 Getting started Your computer's main operating system is Microsoft® Windows®. Your computer may also feature HP QuickWeb (select models only). ● The Microsoft Windows operating system displays the desktop on the display and controls your computer's hardware, peripherals, and software programs.
Using HP QuickWeb (select models only) To start QuickWeb: 1. Turn on your computer. The HP QuickWeb Home screen appears. 2. Click an icon (select models only) on the QuickWeb Home screen or click an icon on the LaunchBar to start a program. NOTE: If QuickWeb has been activated, it starts every time you turn on your computer and displays an automatic timer above the Start Windows icon. If you do not move your mouse or press a key for 15 seconds, the computer starts Microsoft Windows.
2 Knowing the parts Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. To see a list of hardware installed in the computer: ▲ Select Start > Control Panel > System and Security. Click System, and then click Device Manager. You can also add hardware or modify computer configurations using Device Manager.
Component Description (4) Moves the pointer and selects or activates items on the screen. TouchPad zone* *This table describes factory settings. To view or change pointing device preferences, select Start > Devices and Printers. Then, right-click the icon representing your device, and select Mouse settings. Lights Component (1) Description TouchPad off indicator ● On: The TouchPad is off. ● Off: The TouchPad is on. (2) Caps lock light On: Caps lock is on.
Keys Component Description (1) Action keys Execute frequently used system functions. (2) fn key Executes frequently used system functions when pressed in combination with a function key or the esc key. (3) Windows® logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the pointer. Front components Component Description Speakers (2) Produce sound.
Right-side components Component (1) (2) (3) Description Digital Media Slot Power light Power switch Supports the following optional digital card formats: ● Memory Stick (MS) ● MS/Pro ● MultiMediaCard (MMC) ● Secure Digital High Capacity (SDHC) Memory Card (standard and large size) ● xD-Picture card ● White: The computer is on. ● Blinking white: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation.
Component Description (6) RJ-45 (network) jack and cover Connects a network cable. (7) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Left-side components Component Description (1) Power connector Connects an AC adapter. (2) Battery light ● Off: The computer is running on battery power.
Component Description (6) USB port Connects an optional USB device. (7) Audio-out (headphone) jack/Audio-in (microphone) jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. NOTE: When an audio component is connected to the jack, the computer speakers are disabled. The audio component cable must have a 4-conductor connector.
Component (3) Description Webcam Records video and captures still photographs. NOTE: To capture and edit videos, you can use the preinstalled Arcsoft WebCam Companion 3 software. (4) Internal microphone Records sound. Bottom components Component Description (1) Battery release latches (2) Release the battery from the battery bay and lock the battery in the battery bay. (2) Battery bay Holds the battery.
3. Press the right release button (1). 4. Release the right side of the vanity cover (2) by lifting it slightly away from the base. NOTE: It is normal for the vanity cover to flex slightly and you may also hear some popping noises when the vanity cover tabs disengage from the base. 10 5. Press the left release button (1). 6. Release the left side of the vanity cover (2) by lifting it slightly away from the base.
7. Lift the bottom edge of the vanity cover (1) at an angle, and then lift the vanity cover away from the base (2). Replacing the vanity cover Replace the vanity cover after accessing the memory module compartment, SIM card insertion slot, regulatory label, and other important components. To replace the vanity cover: 1. Place the vanity cover (1) above the computer at an angle with the front edge facing the front of the computer. 2.
3. Rotate the front edge (1) of the vanity cover down, and then firmly press the vanity cover onto the base of the computer until it snaps into place (2). 4. Replace the battery. NOTE: For more information, refer to the section “Inserting or removing the battery,” later in this guide. Wireless antennas Component Description (1) WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wireless wide-area networks (WWANs).
To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. These notices are located in Help and Support. Additional hardware components Component Description (1) Power cord* Connects an AC adapter to an AC outlet. (2) AC adapter Converts AC power to DC power. (3) Battery* Powers the computer when the computer is not plugged into external power.
Component 14 (2) Serial number (3) Product number (4) Warranty period (5) Model description (select models) ● Microsoft® Certificate of Authenticity—Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. The Microsoft Certificate of Authenticity is located on the bottom of the computer. ● Regulatory label—Provides regulatory information about the computer. The regulatory label is affixed inside the battery bay.
3 Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power light blinks and the screen clears. Your work is saved to memory, letting you exit the Sleep state faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
NOTE: If you have set a password to be required when the computer exits Sleep, you must enter your Windows password before your work returns to the screen. Initiating and exiting Hibernation Power settings and timeouts can be changed using Power Options in Windows Control Panel. To initiate Hibernation: ▲ Click Start, click the arrow next to the Shut down button, and then click Hibernate. To exit Hibernation: ▲ Briefly slide the power switch.
Customizing power plans 1. Click the Battery Meter icon in the notification area and then click Power options. – or – Select Start > Control Panel > System and Security > Power Options. 2. Select a power plan, and then click Change plan settings. 3. Change the settings as needed. 4. To change additional settings, click Change advanced power settings and make your changes.
Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet.
WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors. Displaying the remaining battery charge ▲ Move the pointer over the Battery Meter icon in the notification area, at the far right of the taskbar.
2. Align the tabs on the battery with the notches on the computer, and then insert the battery into the battery bay. The battery release latches automatically lock the battery into place. To remove the battery: 1. Turn the computer upside down on a flat surface. 2. Slide the battery release latches (1) to release the battery, and then remove the battery (2). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft.
Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer or cooler than room temperature. To prolong battery life and optimize the accuracy of battery charge displays, follow these recommendations: ● If you are charging a new battery, charge it fully before turning on the computer. ● Charge the battery until the battery light turns white.
The computer takes the following actions for a critical battery level: ● If Hibernation is enabled and the computer is on or in Sleep, the computer initiates Hibernation. ● If Hibernation is disabled and the computer is on or in Sleep, the computer remains briefly in Sleep, and then shuts down and loses any unsaved information.
To fully charge the battery: 1. Insert the battery into the computer. 2. Connect the computer to an AC adapter and then plug the adapter into external power. The battery light on the computer turns amber. 3. Leave the computer plugged into external power until the battery is fully charged. The battery light on the computer turns white. Step 2: Disable Hibernation and Sleep 1. Click the Battery Meter icon in the notification area, and then click Power options.
To discharge a battery: 1. Unplug the computer from its external power source, but do not turn off the computer. 2. Run the computer on battery power until the battery is discharged. The battery light begins to blink white when the battery has discharged to a low battery level. When the battery is discharged, the battery light turns off and the computer shuts down. Step 4: Fully recharge the battery To recharge the battery: 1.
● Use the f2 and f3 action keys to adjust screen brightness as needed. ● If you leave your work, initiate Sleep or Hibernation, or shut down the computer. Storing a battery CAUTION: of time. To prevent damage to a battery, do not expose it to high temperatures for extended periods If a computer is unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately. To prolong the charge of a stored battery, place it in a cool, dry place.
If the computer is unresponsive and you are unable to use the preceding shut down procedures, try the following emergency procedures in the sequence provided: 26 ● Press ctrl+alt+delete, and then click the Power button. ● Slide and hold the power switch for at least 5 seconds. ● Disconnect the computer from external power and remove the battery.
4 Internet Your computer supports the following types of Internet access: ● Wired—You can access the Internet by connecting to a broadband network using the RJ-45 (network) jack. ● Wireless—For mobile Internet access, you can use a wireless connection. To learn about setting up a wireless network or adding your computer to an existing network, refer to the “Connecting to a wireless network” section.
Connecting to a wired network Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable: WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem cable or telephone cable into an RJ-45 (network) jack. 28 1.
Connecting to a wireless network Using wireless devices Wireless technology transfers data across radio waves instead of wires.
Icon Name Description HP Connection Manager Opens HP Connection Manager, which enables you to create a connection with an HP Mobile Broadband device (select models only). Wired network (connected) Indicates that one or more of your network drivers are installed and one or more network devices are connected to the network.
– or – Select Start > All Programs > HP > HP Connection Manager. For more details about using Connection Manager, refer to the Connection Manager software Help. Using HP Wireless Assistant software (select models only) A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is disabled by Setup Utility, it must be enabled by Setup Utility before it can be turned on or off using Wireless Assistant.
Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other devices and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of devices and accessories and can separate critical network functions.
When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA)Personal and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the network, other WLAN devices can pick up unprotected signals and either connect to your network (uninvited) or capture information being sent across it.
After the connection is made, place the mouse pointer over the network icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.
Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a mobile phone network operator. Coverage for HP Mobile Broadband is similar to mobile phone voice coverage.
To insert a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery.
4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery. 7. Press in on the SIM, and then remove it from the slot. 8. Replace the battery. NOTE: For more information, refer to the section “Inserting and removing the battery,” earlier in this guide. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer.
Using GPS (select models only) Your computer may be equipped with a Global Positioning System (GPS). GPS satellites deliver location, speed, and direction information to GPS-equipped systems. For more information, refer to the HP Connection Manager or HP Wireless Assistant software Help.
Using HP Navigator software (select models only) HP Navigator software uses the GPS module (select models only) in your computer to display a map of your current location or another address. You can map a specific address, search for a restaurant, store, or other nearby business, display driving instructions, and listen to audible driving instructions. To access HP Navigator: 1. Select Start > All Programs > HP > HP Navigator. 2.
Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following: ● Computers (desktop, notebook, PDA) ● Phones (cellular, smart phone) ● Imaging devices (printer, camera) ● Audio devices (headset, speakers) Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network (PAN) of Bluetooth devices.
5 Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures.
Component Description (1) Webcam light On: The webcam is in use. (2) Webcam Records video and captures still photographs. NOTE: To capture and edit videos, you can use the preinstalled Arcsoft WebCam Companion 3 software. (3) Internal microphone Records sound. (4) Speakers (2) Produce sound. (5) Volume mute action key (f11) Mutes or restores speaker sound. (6) Volume up action key (f10) Increases speaker volume. (7) Volume down action key (f9) Decreases speaker volume.
Component Description NOTE: When a device is connected to the jack, the computer speakers are disabled. The audio component must have a 4-conductor connector. Adjusting the volume You can adjust the volume using the following computer volume action keys: ● To decrease volume, press the volume down action key (f9) (1). ● To increase volume, press the volume up action key (f10) (2). ● To mute or restore volume, press the volume mute action key (f11) (3). ● Windows® volume control: a.
● c. Under Behaviors, select Show icon and notifications for the Speakers icon. d. Click OK. Program volume control: Volume can also be adjusted within some programs.
Using the media activity action keys The media activity action keys control the play of an audio CD or a DVD or BD that is inserted into an external optical drive (purchased separately). NOTE: The external optical drive must be connected to a USB port on the computer, not to a USB port on another external device, such as a hub. ● When an audio CD or a DVD or BD is not playing, press the play/pause action key (f6) (2) to play the disc.
Using preinstalled multimedia software To locate preinstalled multimedia software: ▲ Select Start > All Programs, and then open the multimedia program you want to use. For example, if you want to use Windows Media Player (select models only), click Windows Media Player. NOTE: Some programs may be located in subfolders. Installing multimedia software from the Internet ▲ To install multimedia software from the Internet, go to the software manufacturer’s Web site and follow the instructions.
Audio Your computer has a variety of audio features that allow you to: ● Play music using your computer speakers and/or connected external speakers. ● Record sound using the internal microphone or an optional external headset microphone. ● Download music from the Internet. ● Create multimedia presentations using audio and images. ● Transmit sound and images with instant messaging programs.
To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware and Sound > Sound.
Webcam Your computer includes an integrated webcam, located at the top of the display. The webcam is an input device that allows you to record video and capture still photographs. NOTE: To record and edit videos, you can use the preinstalled Arcsoft WebCam Companion 3 software. To access the webcam using the Arcsoft WebCam Companion 3 software: 1. Select Start > All Programs > Arcsoft WebCam Companion 3. 2. You may choose Capture or Edit from the dialog box.
6 Security Protecting the computer Standard security features provided by the Windows operating system and the non-Windows Setup Utility can protect your personal settings and data from a variety of risks.
You can use the same password for a Setup Utility feature and for a Windows security feature. You can also use the same password for more than one Setup Utility feature. Use the following guidelines when setting a password in Setup Utility: ● A password can be any combination of up to 8 letters and numbers and is case sensitive. ● A password set in Setup Utility must be entered at a Setup Utility prompt. A password set in Windows must be entered at a Windows prompt.
Administrator password Your administrator password protects the configuration settings and system identification information in Setup Utility. After this password is set, you must enter it each time you access Setup Utility. Your administrator password is not interchangeable with an administrator password set in Windows, nor is it displayed as it is set, entered, changed, or deleted. Be sure that you record your password and store it in a safe place.
Managing a power-on password To set, change, or delete this password, follow these steps: 1. Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Set Power-On Password, and then press enter. 3. ● To set a power-on password, type your password in the Enter New Password and Confirm New Password fields, and then press enter.
Using antivirus software When you use the computer for e-mail or Internet access, you expose it to computer viruses that can disable the operating system, programs, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date.
Using firewall software When you use the computer for e-mail, network, or Internet access, unauthorized persons may be able to gain access to the computer, your personal files, and information about you. Use the firewall software preinstalled on the computer to protect your privacy. Firewall features include logging and reporting of network activity, and automatic monitoring of all incoming and outgoing traffic. Refer to the firewall user guide or contact your firewall manufacturer for more information.
Installing critical updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the computer was shipped.
7 Digital cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other devices.
Removing a digital card CAUTION: To prevent loss of information or an unresponsive system, use the following procedure to safely remove the digital card. 1. Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. 2. To remove a digital card: a. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar.
8 USB devices Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to the system. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has 3 USB ports, which support USB 1.0, USB 1.
CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To remove a USB device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon (the arrow at the left of the notification area). 2. Click the name of the device in the list. NOTE: You are informed that it is safe to remove the device. 3.
9 Pointing devices and keyboard Setting pointing device preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Devices and Printers. Then, right-click the device representing your device, and select Mouse settings. Using the TouchPad To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go.
Pinching Pinching allows you to zoom in or out on items such as PDFs, images, and photos. To pinch: ● Zoom in by holding two fingers together on the TouchPad, and then pull the fingers apart to increase an object's size. ● Zoom out by holding two fingers apart on the TouchPad, and then pull the fingers together to decrease an object's size. Connecting an external mouse You can connect an external USB mouse to the computer using one of the USB ports on the computer.
Using the keyboard Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. To use an action key, press and hold this key to activate the assigned function. NOTE: Depending on the program you are using, pressing fn and one of the action keys opens a specific shortcut menu within that program. NOTE: The action key feature is enabled at the factory.
Icon Description Decreases speaker volume incrementally when you hold down this key. Increases speaker volume incrementally when you hold down this key. Mutes or restores speaker sound. Turns the wireless feature on or off. NOTE: This key does not establish a wireless connection. To establish a wireless connection, a wireless network must also be set up. prt sc Takes a snapshot or picture of your computer screen and copies it to the clipboard.
To use a hotkey command on the computer keyboard, follow either of these steps: ● Briefly press the fn key, and then briefly press the second key of the hotkey command. – or – ● Press and hold down the fn key, briefly press the second key of the hotkey command, and then release both keys at the same time.
10 Drives Identifying installed drives To view the drives installed on the computer, select Start > Computer. Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply.
CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions: Before you move a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive. Before handling a drive, discharge static electricity by touching the unpainted metal surface of the drive. Do not touch the connector pins on a removable drive or on the computer.
Using optional external devices NOTE: For more information about required software and drivers, or to learn which device port to use, refer to the manufacturer's instructions. To connect an external device: CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the computer is turned off and the AC power cord is unplugged. 1. Connect the device. 2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet. 3.
11 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer, beneath the vanity cover. The memory capacity of the computer can be upgraded by replacing the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components.
b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 6. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. a. Align the notch (1) in the memory module with the tab in the memory module slot. b.
8. Turn the computer right-side up, and then reconnect external power and external devices. 9. Turn on the computer.
12 Updating software Updated versions of the software provided with your computer may be available on the HP Web site. Most software and BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. To update the software, follow these steps, which are explained in the remainder of this guide: 1.
Updating the BIOS To update the BIOS, first determine what BIOS version you currently have and then download and install the new BIOS. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be displayed by opening Setup Utility. To display the BIOS information: 1.
NOTE: If you connect your computer to a network, consult the network administrator before installing any software updates, especially system BIOS updates. BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps: 1. Open Windows Explorer by selecting Start > Computer. 2. Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:). 3.
Updating programs and drivers To download and install software other than a BIOS update, follow these steps: 1. Access the page on the HP Web site that provides software for your computer: Select Start > Help and Support, and then select the software and drivers update. 2. Follow the instructions on the screen to find the software you want to update. 3. At the download area, select the software you want to download and follow the instructions on the screen.
13 Changing QuickWeb settings Disabling and enabling QuickWeb To disable or enable QuickWeb from within the Windows operating system: 1. Select Start > All Programs > HP QuickWeb. Click HP QuickWeb Configuration Tool. 2. Click the Status tab, and then select the Enable or Disable. 3. Click OK. NOTE: The HP QuickWeb Configuration Tool can also be accessed by selecting Start > Control Panel, and then clicking the View by arrow.
14 Setup Utility Starting Setup Utility Setup Utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working. The utility reports information about the computer and provides settings for startup, security, and other preferences. To start Setup Utility: ▲ Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
● To select an item, press enter. ● To close a text box or return to the menu display, press esc. ● To display additional navigation and selection information while Setup Utility is open, press f1. Displaying system information The following procedure explains how to display system information in Setup Utility. If Setup Utility is not open, begin at step 1. If Setup Utility is open, begin at step 2. 1.
Setup Utility menus The menu tables in this section provide an overview of the Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your computer. Main menu Select To do this System information ● View and change the system time and date. ● View identification information about the computer. ● View specification information about the processor, memory size, and system BIOS.
Select To do this ◦ USB Card Reader ◦ Network adapter NOTE: Only the devices attached to the system appear in the boot order menu. Diagnostics menu 80 Select To do this Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive. Memory Test Run a diagnostic test on the system memory.
Index A AC adapter connecting 18 identifying 13 action keys 5 administrator password creating 52 entering 52 managing 52 airport security devices 67 antennas 12 applications key, Windows 5 audio devices, connecting external 47 audio functions, checking 47 audio-in (microphone) jack 8, 42 audio-out (headphone) jack 8, 42 B battery calibrating 22 charging 20, 22 discharging 21 disposing 25 identifying 13 inserting 19 low battery levels 21 recharging 24 removing 19 storing 25 battery bay 14 battery bay, ident
H hard drive self test 80 hard drive, external 67 hardware, identifying 3 headphone (audio-out) jack 8, 42 headphones 8, 42 Hibernation exiting 16 initiated during critical battery level 22 initiating 16 hotkeys description 64 using 65 HP Connection Manager software 30 HP Mobile Broadband Module 35 HP Mobile Broadband, disabled 35 HP Navigator 39 hubs 59 I icons Connection Manager 29 network 29 wired network 29 wireless 29 indicators TouchPad off 3 internal display switch, identifying 8 internal microphone,
regulatory information regulatory label 14 wireless certification labels 14 release latches, battery 9, 20 restoring default settings 78 right TouchPad button, identifying 3 RJ-45 (network) jack, identifying 7 U unresponsive system 25 USB cable, connecting 59 USB devices connecting 59 description 59 removing 59 USB hubs 59 USB ports, identifying 6, 8, 59 S security cable slot 7 Security menu 79 security, wireless 32 selecting in Setup Utility 77 serial number, computer 13 setup of WLAN 32 Setup Utility, p
