HP Mini User Guide
© Copyright 2010 Hewlett-Packard Development Company, L.P. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Welcome .......................................................................................................................................................... 1 What's new? ......................................................................................................................................... 1 Finding information ...............................................................................................................................
Using pointing devices ....................................................................................................................... 21 Setting pointing device preferences ................................................................................... 21 Using the TouchPad .......................................................................................................... 21 Turning the TouchPad on and off ......................................................................
Testing an AC adapter ....................................................................................................... 34 7 Drives ............................................................................................................................................................. 35 Handling drives ................................................................................................................................... 35 Replacing or upgrading the hard drive ........................
Displaying system information ........................................................................................... 55 Restoring factory default settings in Setup Utility .............................................................. 55 Exiting Setup Utility ............................................................................................................ 55 Updating the BIOS .....................................................................................................................
1 Welcome ● What's new? ● Finding information After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page 13. ● Get to know your computer—Learn about your computer features. Refer to Getting to know your computer on page 3 and Keyboard and pointing devices on page 19 for additional information.
Resources For information about Safety & Comfort Guide ● Proper workstation setup, posture, health, and work habits To access this guide: ● Electrical and mechanical safety information Select Computer > Help. – or – Go to http://www.hp.com/ergo. Worldwide Telephone Numbers booklet HP support telephone numbers This booklet is provided with your computer. HP Web site ● Support information To access this Web site, go to http://www.hp.com/ support.
2 Getting to know your computer ● Top ● Front ● Right side ● Left side ● Display ● Bottom Top Top cover Component Description Network light Off: All network functions are off. On: The computer is connected to a wired network or an integrated wireless device, such as a wireless local area network (WLAN) device, is on.
TouchPad Component 4 Description (1) TouchPad light Turns the TouchPad on and off. Quickly double-tap the TouchPad light to turn the TouchPad on and off. (2) TouchPad zone Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button Functions like the left button on an external mouse. (4) Right TouchPad button Functions like the right button on an external mouse.
Lights Component (1) (2) (3) (4) (5) Description TouchPad light Caps lock light Power light Mute light Wireless light ● On: The TouchPad is off. ● Off: The TouchPad is on. ● On: Caps lock is on. ● Off: Caps lock is off. ● On: The computer is on. ● Blinking: The computer is in the Suspend state. ● Off: The computer is off or in Hibernation. ● On: Computer sound is off. ● Off: Computer sound is on. ● Off: All wireless devices are off.
Power button Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Suspend. ● When the computer is in the Suspend state, press the button briefly to exit Suspend. ● When the computer is in Hibernation, press the button briefly to exit Hibernation.
Keys Component Description (1) fn key Executes frequently used system functions when pressed in combination with a function key. (2) Function keys Execute frequently used system functions when pressed in combination with the fn key.
Front Component Description (1) Enables airflow to cool internal components. Vent NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (2) 8 Speaker Chapter 2 Getting to know your computer Produces sound.
Right side Component (1) Description Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or television audio. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. NOTE: When a device is connected to the jack, the computer speaker is disabled.
Left side Component (1) Description Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. 10 (2) Power connector Connects an AC adapter. (3) Battery light ● Off: The computer is running on battery power. ● Amber: The battery has reached a low or critical level or there is a battery error.
Display Component Description (1) Internal microphone Records sound. (2) Webcam light On: The webcam is in use. (3) Webcam Records video and captures still photographs. (4) WLAN antenna* Sends and receives wireless signals to communicate with wireless local area networks (WLAN). *The antenna is not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antenna free from obstructions.
Bottom Component (1) Description Computer handle (select models only) Allows you to carry the computer. CAUTION: To reduce the risk of damaging the computer, close the computer before picking it up by the handle. (2) Service access cover Provides access to the hard drive bay, a memory module slot, and the wireless local area network (WLAN) module. (3) Battery locking latch Locks the battery into the battery bay. (4) Vent Enables airflow to cool internal components.
3 Networking ● Using an Internet service provider (ISP) ● Identifying wireless and network status icons ● Creating a wireless connection ● Using a WLAN ● Connecting to a wired network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection.
Creating a wireless connection Your computer may be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device ● HP Mobile Broadband Module, a wireless wide area network (WWAN) device ● Bluetooth® device Using the operating system controls To enable or disable a wireless and/or wired network device: 1. Right-click the Network Connection icon in the notification area, at the far right of the taskbar. 2.
Setting up a new WLAN Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● The wireless computer (3) The illustration below shows an example of a wireless network installation that is connected to the Internet. NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have.
new network. If the operating system does not recognize the new network, follow the same procedure you used initially to connect to your WLAN. Connecting to a wired network Using a modem (select models only) A modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (purchased separately). In some countries or regions, a specific modem cable adapter is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.
Connecting a country- or region-specific modem cable adapter Telephone jacks vary by country or region. To use the modem and the modem cable outside the country or region in which you purchased the computer, you must obtain a country- or region-specific modem cable adapter. To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, follow these steps: 1. Plug the modem cable into the modem jack (1) on the computer. 2.
2. Plug the other end of the cable into a network wall jack (2). WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem or telephone cable into the RJ-45 (network) jack.
4 Keyboard and pointing devices ● Using the keyboard ● Using pointing devices Using the keyboard Identifying the hotkeys A hotkey is a combination of the fn key (1) and one of the function keys (2). To use a hotkey: ▲ Briefly press the fn key, and then briefly press the second key of the hotkey combination. Hotkey combination fn+f1 Description Opens Help. Help provides tutorials, answers to questions, and product updates. fn+f2 Decreases the screen brightness level.
Hotkey combination Description fn+f6 Plays, pauses, or resumes an audio CD, a DVD, or a BD. fn+f7 Stops audio or video playback of a CD, a DVD, or a BD. fn+f8 Plays the next track of an audio CD or the next section of a DVD or a BD. fn+f9 Decreases speaker volume. fn+f10 Increases speaker volume. fn+f11 Mutes or restores speaker sound. fn+f12 Turns the wireless feature on or off. NOTE: This hotkey does not establish a wireless connection.
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences To customize settings for pointing devices, such as button configuration, click speed, and pointer options, select Computer > Control Center > Mouse.
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.
5 Multimedia ● Using the media activity action keys ● Audio ● Webcam ● External monitor (VGA) port Your computer may include the following: ● Integrated speakers ● Integrated microphones ● Integrated webcam ● Preinstalled multimedia software ● Multimedia buttons or keys Using the media activity action keys Depending on your computer model, you may have the following media activity controls that allow you to play, pause, fast forward, or rewind a media file: ● Media buttons ● Media hotk
Adjusting the volume Depending on your computer model, you can adjust the volume using the following: ● Volume buttons ● Volume hotkeys ● Volume keys WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. NOTE: Volume can also be controlled through the operating system and some programs.
▲ To connect a VGA display device, connect the device cable to the external monitor port. NOTE: Press fn+f4 to switch the image between the display devices connected to the computer.
6 Power management ● Shutting down the computer ● Setting power options ● Using battery power ● Using external AC power Shutting down the computer CAUTION: Unsaved information will be lost when the computer is shut down. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer.
CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Suspend or Hibernation while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Suspend state or in Hibernation.
Using the Power icon The Power icon is located in the notification area, at the far right of the taskbar. The Power icon allows you to quickly access power settings, view remaining battery charge, and select a different power plan. ● To display the percentage of remaining battery charge, click the Power icon, and then click Information. ● To access Power Management Preferences, click the Power icon, and then click Preferences.
Displaying the remaining battery charge ▲ Move the pointer over the Power icon, in the notification area, at the far right of the taskbar. Inserting or removing the battery To insert the battery: 1. Lower the outside edge (1) of the battery into the battery bay. 2. Press down on the inside edge (2) of the battery until you hear a click. 3. Slide the battery locking latch (3) inward to lock the battery into the battery bay.
3. Lift the inner edge (3) of the battery, and remove the battery from the computer. Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter or an optional power adapter. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
4. Click the check box next to Dim display when idle. 5. Click Close. Managing low battery levels The information in this section describes the alerts and system responses set at the factory. Some low-battery alerts and system responses can be changed using Power Management in Control Center. Preferences set using Power Management do not affect lights.
● Stop, disable, or remove any external media cards that you are not using. ● Decrease brightness. ● Initiate Suspend or Hibernation or shut down when you are not using the computer. Storing a battery CAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures for extended periods of time. If a computer will be unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately.
When you connect the computer to external AC power, the following events occur: ● The battery begins to charge. ● If the computer is turned on, the battery meter icon in the notification area changes appearance. When you disconnect external AC power, the following events occur: ● The computer switches to battery power. ● The display brightness is automatically decreased to save battery life.
Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power: ● The computer does not turn on. ● The display does not turn on. ● The power light is off. To test the AC adapter: 1. Shut down the computer. 2. Remove the battery from the computer. 3. Connect the AC adapter to the computer, and then plug it into an AC outlet. 4. Turn on the computer. ● If the power light turns on, the AC adapter is functioning properly.
7 Drives ● Handling drives ● Replacing or upgrading the hard drive Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. Observe these precautions: ● Before you move a computer that is connected to an external hard drive, initiate Suspend and allow the screen to clear, or properly disconnect the external hard drive.
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Suspend state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. Removing the hard drive 36 1.
8. Grasp the tab (2), and lift the hard drive out of the hard drive bay. Installing the hard drive 1. Grasp the tab (1) and lower the hard drive (2) into the hard drive bay. 2. Replace the 4 hard drive screws (3). 3. Align the tabs (1) on the service access cover with the notches on the computer. 4. Close the cover (2).
38 5. Replace the 2 screws (3) on the service access cover. 6. Replace the battery. 7. Reconnect external power and external devices. 8. Turn on the computer.
8 External cards and devices ● Using the SD Card Reader ● Using a USB device ● Using optional external devices Using the SD Card Reader Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. To determine which digital card formats that are supported on your computer, refer to Getting to know your computer on page 3.
To remove a digital card: 1. Open File Browser by selecting Computer > Nautilus. 2. Click the Eject icon next to the name of the digital card in the Places list on the left pane of File Browser. NOTE: You are prompted that it is safe to remove the digital card. 3. Press in on the card (1), and then remove it from the slot (2).
Connecting a USB device CAUTION: To prevent damage to a USB connector, use minimal force to connect a USB device. ▲ To connect a USB device to the computer, connect the USB cable for the device to the USB port. You will hear a sound when the device has been detected. NOTE: When you connect a USB device, you may see a message in the notification area to let you know that the device is recognized by the system.
CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the device is turned off and the AC power cord is unplugged. 1. Connect the device to the computer. 2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet. 3. Turn on the device. To disconnect an unpowered external device, turn off the device, and then disconnect it from the computer.
9 Memory module Replacing the memory module The computer has one memory module slot, which contains either a 1-GB memory module or a 2-GB memory module. If your computer has a 1-GB module, you can upgrade the capacity of the computer by replacing the 1-GB module with a 2-GB module. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove the battery before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components.
6. Lift the inside edge (2) of the cover, and then slide the cover (3) toward you to remove it. 7. Remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up.
b. Grasp the edge of the memory module (2), and then gently pull the memory module out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. 8. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. 9. Align the tabs (1) on the service access cover with the notches on the computer. 10. Close the cover (2). 11. Replace the 2 screws (3) on the service access cover. 12. Replace the battery.
13. Reconnect external power and external devices. 14. Turn on the computer.
10 Security ● Protecting the computer ● Using passwords ● Using firewall software ● Installing an optional security cable Protecting the computer NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacks or prevent the computer from being mishandled or stolen. Security features provided with your computer can protect the computer, personal information, and data from a variety of risks.
Setting passwords in the operating system Operating system passwords Function Root password Protects access to an operating system root-level account. User password Protects access to an operating system user account. Setting passwords in Setup Utility Setup Utility passwords Function Administrator password* ● Protects access to Setup Utility. ● After this password is set, it must be entered each time you access Setup Utility.
Managing an administrator password To set, change, or delete this password, follow these steps: 1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10. 2. Use the arrow keys to select Security > Set Administrator password, and then press enter. 3.
Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program you install on your computer and/or network, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider: ● Host-based firewalls—Software that protects only the computer it is installed on.
Installing an optional security cable NOTE: A security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. NOTE: The security cable slot on your computer may look different from the illustration in this section. Refer to Getting to know your computer on page 3 for the location of the security cable slot on your computer. 52 1. Loop the security cable around a secured object. 2. Insert the key (1) into the cable lock (2). 3.
11 Backup and Recovery Recovery after a system failure is as good as your most recent backup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. Performing a system recovery Recovery allows you to repair or restore the computer to its original factory state. Recovery works from a dedicated recovery partition on the hard drive.
12 Setup Utility (BIOS) ● Starting Setup Utility ● Using Setup Utility ● Updating the BIOS Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility includes settings for the types of peripherals installed, the startup sequence of the computer, and the amount of system and extended memory. CAUTION: Use extreme care when making changes in Setup Utility.
Displaying system information 1. Start Setup Utility. 2. Select the Main menu. System information such as the system time and date, and identification information about the computer is displayed. 3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. Restoring factory default settings in Setup Utility 1. Start Setup Utility. 2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter. 3.
Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc or by using Setup Utility. 1. Start Setup Utility. 2. If the system information is not displayed, use the arrow keys to select the Main menu. BIOS and other system information is displayed.
A Troubleshooting and support ● Troubleshooting ● Contacting customer support ● Labels Troubleshooting The following sections describe several common issues and solutions.
The computer is on but not responding If the computer is turned on but is not responding to software or keyboard commands, try the following emergency shutdown procedures, in the sequence provided, until shutdown occurs: CAUTION: Emergency shutdown procedures result in the loss of unsaved information. ● Press ctrl+alt+delete, and then click Shut down. ● Press and hold the power button for at least 5 seconds. ● Disconnect the computer from external power and remove the battery.
● Be sure that the wireless router or access point is properly connected to its power adapter and to the cable or DSL modem, and that the lights are on. ● Disconnect and then reconnect all cables, and turn the power off and then back on. Contacting customer support If the information provided in this guide does not address your questions, you can contact HP Customer Support at: http://www.hp.
Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer. 60 ● Regulatory label—Provides regulatory information about the computer. The regulatory label is affixed inside the battery bay. ● Wireless certification label or labels (select models only)—Provide information about optional wireless devices and the approval markings of some of the countries or regions in which the devices have been approved for use.
B Routine care Cleaning guidelines This section provides the best practices and recommendations for safely cleaning and disinfecting your notebook or tablet PC. Cleaning products Use the following products to safely clean and disinfect your notebook or tablet PC. ● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, germicidal disposable wipes. These wipes come in a variety of brand names.
Cleaning the TouchPad and keyboard CAUTION: When cleaning the TouchPad and keyboard, do not let liquids drip between the keys. A liquid spill can permanently damage internal components. ● To clean and disinfect the TouchPad and keyboard, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable germicidal disposable wipe.
C Specifications ● Input power ● Operating environment Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz.
D Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
Index A action keys volume 24 administrator password creating 50 entering 50 managing 50 airport security devices 35 audio features 23 audio functions, checking 24 audio-in (microphone) jack, identifying 9 audio-out (headphone) jack, identifying 9 B backup 53 battery charging 30 conserving power 31 disposing 32 life 30 low battery levels 31 storing 32 battery bay 60 battery bay, identifying 12 battery light, identifying 10 battery locking latch; identifying 12 battery power 28 battery release latch 12 batte
I icons network 13 wired network 13 wireless 13 input power 63 integrated webcam light, identifying 11 internal microphone, identifying 11 Internet connection setup ISP, using 13 issues, resolving 57 local area network (LAN) cable required 17 connecting cable 17 low battery level 31 M managing a power-on password 50 managing an administrator password 50 media controls 23 media controls, keys 19 memory module inserting 45 removing 44 replacing 43 microphone (audio-in) jack 9 modem (RJ-11) jack, identifying
restoring default settings 55 selecting 54 starting 54 Setup Utility, passwords set in 49 shut down 26 slots security cable 9 speaker, identifying 8 storing battery 32 Suspend exiting 27 initiating 27 system information, displaying 55 T temperature 32 TouchPad buttons 4 cleaning 62 using 21 TouchPad light, identifying 4 TouchPad zone, identifying 4 traveling with the computer 32, 60 turning off the computer 26 wireless devices, types 14 wireless encryption 15 wireless icon 13 wireless key, identifying 20 w
