Implementing Windows Server 2012 SR-IOV on HP ProLiant Servers, 2nd edition

Technical white paper | Microsoft Windows Server 2012 SR-IOV
12
Figure 9: Start the VM
Making sure that the VM is enabled
To test the SR-IOV physical functions (PF) and virtual functions (VF), complete the following steps:
1. Launch Windows PowerShell 3.0.
2. To confirm that IOV support and IovVirtualFunction are enabled, type the PowerShell command:
get-vmswitch | fl
3. Verify the VM name.
4. Verify the following parameters. These parameters are set as follows when IOV support and IovVirtualFunction are
enabled:
– IovEnabled = True
– IovVirtualFunctionCount = 32
– IovVirtualFunctionInUse = 1
– SriovSupport = Supported
– NumVFs = 62