HP Factory-Installed Operating System Software for Microsoft Windows Server® 2008 R2 Foundation and Windows Server® 2012 Foundation User Guide

Post-installation tasks for HP ProLiant 300 series servers only 25
o
If your operating system is Windows Server 2008 R2 Foundation, click Start, and then select All
Programs>HP System Tools>HP Array Configuration Utility>HP Array Configuration Utility.
o If your operating system is Windows Server 2012 Foundation, press the Windows key on the
keyboard, right click anywhere in the Start page, then click All Apps>HP System Tool>HP Array
Configuration utility>HP Array Configuration utility.
2. Select whether you want to enable remote administration when prompted.
3. Click OK.
4. When prompted for the Web-Based Management password, enter the credentials for either the local
administrator account or a local user account in the following format:
domain name\login name
5. Configure the remaining physical drives into logical drives, and run Disk Administrator to partition and
format the additional drive space.
For more information about using the ACU, see the HP Online Help
(http://h18004.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/inde
x.html).
Using Management Agents
The Management Agents for servers are installed during the setup process. For more information about the
Management Agents, refer to the HP Insight Management Agents User Guide
(http://h18013.www1.hp.com/products/servers/management/agents/documentation.html
).