Implementing Microsoft® Windows Server® 2008 R2 Hyper-V™ and Microsoft Hyper-V Server 2008 R2

• If installing HP Systems Insight Manager and agents, make sure the SNMP service is loaded and

started.

Enabling support for hardware-assisted virtualization in the RBSU

Hyper-V Server 2008 R2 uses an advanced processor feature known as hardware-assisted

virtualization. On most ProLiant servers, this feature is enabled by default. Enable hardware-assisted

virtualization by following the appropriate procedure in the following sections.

ProLiant servers with Intel Processors

To enable support for hardware-assisted virtualization in the RBSU, complete the following steps:

1. Restart or power-on the server.

2. Access the RBSU by pressing F9 when prompted.

3. From the RBSU Menu, select Advanced Options.

4. From the Advanced Options menu, select Processor Options.

5. If the server supports Hyper-Threading, select Processor Hyper-Threading, press Enter, and then

select Disabled.