Implementing Microsoft® Windows Server® 2008 R2 Hyper-V™ and Microsoft Hyper-V Server 2008 R2

Table 7. Supported ProLiant network interface controller options

Location

Gigabit NIC Driver

Download Windows

Media

PSP 8.30

NC110T

NC360M

NC360T

NC364T

NC364M

e1e6232e. sys 9 9

NC112T

NC362I

e1q62x64.sys 9 9

NC370T/F/I

NC371I

NC373T/F/M/I

NC374M

NC380T

NC382I/T

bxvbda.sys 9 9

NC375I

NC522

NC524

hpnd6x64. sys 9

NOTE

HP ProLiant Network Teaming Software (HP Network Configuration Utility

(NCU) version 9.35 [or greater]) supports NIC teaming for Hyper-V. It is

included with HP ProLiant Support Pack (PSP) 8.30 on the HP SmartStart

CD. It is also available as a download from the following URL:

http://www.hp.com.

For more information on HP ProLiant Network Adapter Teaming, refer to

the “

For More Information” section at the end of this document.

Deploying Windows Server 2008 R2 Hyper-V

on ProLiant servers

Windows Server 2008 R2 Hyper-V requires manual installation after successfully installing Windows

Server 2008 R2.

IMPORTANT

The procedures in this integration note are for installing Windows Server

2008 R2 Hyper-V with a full Windows Server 2008 R2 installation. For

instructions on performing an installation using server core, go to

http://technet.microsoft.com/en-us/library/cc753802.aspx.