Windows Server® 2008 R2 and Windows Server® 2008 SP2 on HP Integrity Servers Overview HP Part Number: T8704-96006 Published: September 2010 Edition: 4
© Copyright 2009 Hewlett-Packard Development Company, L.P. Legal Notices Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Table of Contents About This Document.........................................................................................................5 Intended Audience.................................................................................................................................5 Typographic Conventions......................................................................................................................5 Related Information..........................................................
About This Document This document introduces the Windows Server® 2008 and Windows Server® 2008 R2 on HP Integrity servers products and describes the structure of the documentation. In addition, it provides recommended reading paths through the documentation. Intended Audience This document is intended for IT professionals who install, configure, and manage HP Integrity servers that run the Microsoft Windows Server 2008 and Windows Server 2008 R2 operating systems.
1 Introduction The HP Windows Solution Release 7.0 is a tested set of HP manageability software, I/O card drivers and firmware, the Windows Server operating system, and Microsoft QFEs. This set has been tested with each HP Integrity platform supported in this release. Release 7.0 supports both Windows Server 2008 SP2 and Windows Server 2008 R2 on the HP Integrity BL860c, BL870c, rx2660, rx3600, rx6600, rx7640, rx8640, and Superdome (sx2000). In addition, Release 7.
Server 2008 R2 or Windows Server 2008 SP2 (except BL8x0c i2) is installed on the system. Reinstall image DVDs for currently shipping operating systems are also included in the media kits in order to upgrade or downgrade the operating system as needed.
Verifying hardware card installation After you determine which hardware I/O cards are supported on your system, verify that they are installed. If they are installed, go to “Installing the software” (page 10). If they are not installed, this section shows the appropriate documentation for installing network, SCSI, RAID SmartArray, and Fibre Channel HBA components.
1. For mezzanine card installation, see the User Service Guide for your specific system: BL860c HP Integrity BL860c Server Blade User Service Guide at: http://bizsupport.austin.hp.com/bc/docs/support/ SupportManual/c01157868/c01157868.pdf BL870c HP Integrity BL870c Server Blade User Service Guide at: http://bizsupport.austin.hp.com/bc/docs/support/ SupportManual/c01327127/c01327127.
1. 2. Booting Windows Server 2003 for Itanium-based systems from a storage area network application notes Windows Server 2008 SP2 on HP Integrity Servers Installation Guide or Windows Server 2008 R2 on HP Integrity Servers Installation Guide Installation to multiple systems using RDP If you want to install the Windows software to multiple systems using RDP, see the following documents in order: 1. 2.
information on using the SAC, see the Windows Server 2008 and Windows Server 2008 R2 Hardware Administration Guide. Managing software and firmware versions To enable you to better manage your server, HP provides the HP Version Control Repository Manager (VCRM) and HP Version Control Agent (VCA). The VCRM stores the software and firmware components that support Integrity servers on Windows platforms.
Kernel Debug Guide Provides information for driver writers to debug device drivers and for support professionals to analyze system crashes. Windows Server 2008 Recovery Guide Describes Windows Server 2008 recovery features and their recommended order of use. Windows Server 2008 R2 Recovery Guide Describes Windows Server 2008 R2 recovery features and their recommended order of use.
