Windows Server 2008 R2 on Integrity Servers Release Notes
BL860c and BL870c Server Blade
Table 1-7 Components supported with BL860c and BL870c
• Windows Server 2008 R2 for Itanium-based SystemsOperating System
• Dual Port 4 Gb/s FC Mezzanine Card (Q-Logic) (403619-B21)
• 8 Gigabit Mezzanine FC HBA (Emulex) (456972-B21)
• 8 Gigabit Mezzanine FC HBA (QLogic) (451871-B21)
• Emulex LPe1105-HP 4 Gb FC HBA (403621-B21)
• HP PCI Express Mezzanine Pass-Thru Card (431643-B21)
1
• PCI Express Quad Port Gigabit Mezzanine NIC (NC364M) (447883-B21)
• PCI Express Dual Port Gigabit Mezzanine NIC (NC360m) (445978-B21)
• P700m Smart Array Mezzanine Card (451017-B21)
I/O Mezzanine
Support
• Integrity iLO 2
• Integrity iLO Advanced Pack
Management
Processor
• TFT7600 Rack Mount Keyboard Monitor (all versions)Graphic Console
1 Supported on the BL860c only.
BL860c i2, BL870c i2, and BL890c i2 Server Blade
Table 1-8 Components supported with BL860c i2, BL870c i2, and BL890c i2
• Windows Server 2008 R2 for Itanium-based SystemsOperating System
• Emulex LPe1205-HP Dual port 8 Gb FC HBA (456972-B21)
1
• HP QMH 2562 Dual port 8 Gb FC BL-c HBA (QLogic) (451871-B21)
1
• PCI Express Quad Port Gigabit Mezzanine NIC (NC364M) (447883-B21)
• HP NC532m Dual port 10 Gigabit Ethernet Mezzanine NIC (467799-B21)
• PCI Express Dual Port Gigabit Mezzanine NIC (NC360m) (445978-B21)
• P700m Smart Array Mezzanine Card (451017-B21)
2
I/O Mezzanine
Support
• Integrity iLO 3
• Integrity iLO Advanced Pack
Management
Processor
• TFT7600 Rack Mount Keyboard Monitor (all versions)Graphic Console
1 For boot, you must place the card in the left-most, or 1st blade, in the rack.
2 For data only; not supported for boot.
Troubleshooting Common Issues
Read this section completely before installing or running Windows Server 2008 R2 on HP Integrity
servers. This section includes workarounds that can save you valuable time and effort.
Crash Dump
No visual status indication when creating a crash dump
Issue When a crash dump is automatically created after a Windows blue screen, there
is no visual indication such as the percentage complete status. The system might
appear to be hung.
Servers HP Integrity BL8x0 i2 server blade
Workaround Do not reset the system manually. To get a successful crash dump, you must
wait for the system to reboot automatically after completing the dump. For a
kernel dump, this might take less than 10 minute. For a full memory dump, this
might take up to 1 hour.
18 Release 7.0 Overview