Smart Array Internal Cabling Guide

Cabling for the HP 9000 rp3440 Server
Recabling for RAID
Chapter 7
70
Figure 7-7 Location of Fan 2 and Fan 3
Step 2. To remove a fan, grasp the fan module with your index finger and thumb and lift it out of its slot.
Note that each of the modules has indentations for grasping them with your index finger and
thumb (see Figure 7-8).
Figure 7-8 Removing the Fans
Step 3. To remove a SCSI cable, lift up on the fan power bridge as shown in Figure 7-9.
Figure 7-9 Lifting the Fan Power Bridge
2
3
Front of server