Management Agents Events Reference

Event DescriptionEvent SeverityEvent ID
This indicates the failure in updating the GNI info of the cell with CLM. Probable
Cause: The partition level memory will fail at this point. SNMP Trap:
hpevtPdMemUpdateCellGniFailed - 5569 in HPIFPTRAP.MIB.Error5569
This indicates the failure in adjusting the mem info with Minimum ZI req. Probable
Cause: This will cause the partition level memory to exit cell interleaving. SNMP
Trap: hpevtPdMemAdjustMinZiFailed - 5570 in HPIFPTRAP.MIB.Error5570
Complex Profile A has a checksum error. Probable Cause: Reconfigure the system
get a new complex profile distributed and reset. SNMP Trap:
hpevtStableProfileXsumError - 5572 in HPIFPTRAP.MIB.Error5572
A Checksum error was encountered in the dynamic profile. Probable Cause: Push
out a new complex profile and reset. SNMP Trap: hpevtDynamicProfileXsumError
- 5573 in HPIFPTRAP.MIB.Warning5573
A checksum error occurred on the Partition Profile. Probable Cause: Push out a new
complex profile and reboot. SNMP Trap: hpevtPartitionProfileXsumError - 5574 in
HPIFPTRAP.MIB.Warning5574
The Stable Complex Profile Sequence Id is invalid. Probable Cause: Push out a new
complex profile and reset the system. The cell will be waiting for reconfiguration.
SNMP Trap: hpevtStableProfileSeqidInvalid - 5575 in HPIFPTRAP.MIB.Error5575
The Dynamic Complex Profile Sequence ID is invalid. Probable Cause: Push out a
new complex profile. SNMP Trap: hpevtDynamicProfileSeqidInvalid - 5577 in
HPIFPTRAP.MIB.Warning5577
The Partition Profile Sequence ID is invalid. Probable Cause: Push out a new complex
profile and reset. The cell will be waiting for reconfiguration. SNMP Trap:
hpevtPartitionProfileSeqidInvalid - 5578 in HPIFPTRAP.MIB.Error5578
Internal Firmware Programming Error from the EFI portion of the firmware. Probable
Cause: Report the IPF to the firmware team. Reset the system. This cannot be worked
around in the field. SNMP Trap: hpevtEfiFwError - 5579 in HPIFPTRAP.MIB.Error5579
The PD numbers in Group A and Group C of the complex profile are inconsistent.
Probable Cause: Push out consistent Complex profiles and reset the system. The cell
will be waiting for reconfiguration. SNMP Trap: hpevtCmplxProfilePdNumMismatch
- 5580 in HPIFPTRAP.MIB.Error5580
The PD number specified in the complex profile is out of range. Probable Cause:
Reconfigure the partition number, push out a new profile and reset. SNMP Trap:
hpevtCmplxProfilePdNumInvalid - 5581 in HPIFPTRAP.MIB.Error5581
Could not obtain the crossbar port semaphore. Probable Cause: No action required
SNMP Trap: hpevtXbcPortSm4Error - 5583 in HPIFPTRAP.MIB.Warning5583
Could not release the crossbar port semaphore. Probable Cause: No action required.
SNMP Trap: hpevtXbcPortSm4NotReleased - 5584 in HPIFPTRAP.MIB.Warning5584
BMC token upload failure. Probable Cause: Problem accessing the BMC.
Recommended Action: AC power cycle or update BMC and System FW. If problem
persists contact your HP representative for support. SNMP Trap:
hpevtBootBmcTokenUploadFailure - 5594 in HPIFPTRAP.MIB.Error5594
NVM token access failure. Probable Cause: NVM Error, or incorrect permissions to
read token. Recommended Action: Retry, AC power cycle if necessary, if problem
persists contact your HP representative for support. SNMP Trap:
hpevtBootNvmTokenAccessFailure - 5595 in HPIFPTRAP.MIB.Warning5595
BMC token download failure. Probable Cause: Problem accessing the BMC.
Recommended Action: AC power cycle or update BMC and System FW. If problem
persists contact your HP representative for support. SNMP Trap:
hpevtBootBmcTokenDownloadError - 5596 in HPIFPTRAP.MIB.Warning5596
28 Management Agents Event Tables