Management Agents Events Reference

Event DescriptionEvent
Severity
Event ID
Drive Array Spare Drive Status Change. The spare drive in %4, port %5, bay %6 has
a new status of %2.%n(Spare status values: 1=other, 2=invalid, 3=failed, 4=inactive,
5=building, 6=active)%n [SNMP TRAP: 3035 in CPQIDA.MIB]
Warning1201
Drive Array Physical Drive Status Change. The physical drive in %4, port %5, bay
%6 with serial number "%7", has a new status of %2.%n(Drive status values: 1=other,
2=ok, 3=failed, 4=predictiveFailure)%n [SNMP TRAP: 3036 in CPQIDA.MIB]
Warning1202
Drive Array Physical Drive Threshold Exceeded. The physical drive in %4, port %5,
bay %6 with serial number "%7", has exceeded a drive threshold.%n [SNMP TRAP:
3037 in CPQIDA.MIB]
Warning1203
Drive Array Accelerator Status Change. The array accelerator board attached to the
array controller in %4 has a new status of %2.%n(Accelerator status values: 1=other,
2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)%n [SNMP TRAP:
3038 in CPQIDA.MIB]
Warning1204
Drive Array Accelerator Bad Data. The array accelerator board attached to the array
controller in %4 is reporting that it contains bad cached data.%n [SNMP TRAP: 3039
in CPQIDA.MIB]
Warning1205
Drive Array Accelerator Battery Failed. The array accelerator board attached to the
array controller in %4 is reporting a battery failure.%n [SNMP TRAP: 3040 in
CPQIDA.MIB]
Warning1206
Drive Array Tape Library Status Change. The tape library in %4, SCSI bus %5, SCSI
target %6 has a new status of %7.%n(Library status values: 1=other, 2=ok, 3=degraded,
4=failed, 5=offline)%n [SNMP TRAP: 3041 in CPQIDA.MIB]
Warning1207
Drive Array Tape Library Door Status Change. The tape library in %4, SCSI bus %5,
SCSI target %6 has a new door status of %7.%n(Library door status values: 1=other,
2=notSupported, 3=closed, 4=open)%n [SNMP TRAP: 3042 in CPQIDA.MIB]
Warning1208
Drive Array Tape Drive Status Change. The tape drive in %4, SCSI bus %5, SCSI
target %6 has a new status of %7.%n(Tape drive status values: 1=other, 2=ok,
3=degraded, 4=failed, 5=offline, 6=missingWasOk, 7=missingWasOffline)%n [SNMP
TRAP: 3043 in CPQIDA.MIB]
Warning1209
Drive Array Tape Drive Cleaning Required. The tape drive in %4, SCSI bus %5, SCSI
target %6 requires cleaning.%n [SNMP TRAP: 3044 in CPQIDA.MIB]
Warning1210
Drive Array Tape Drive Replace Cleaning Tape. The cleaning tape in the tape drive
in %4, SCSI bus %5, SCSI target %6 needs to be replaced.%n [SNMP TRAP: 3045 in
CPQIDA.MIB]
Warning1211
Drive Array Physical Drive Status Change. The physical drive in %4, %5 with serial
number "%7", has a new status of %2. %n(Drive status values: 1=other, 2=ok, 3=failed,
4=predictiveFailure) %n [SNMP TRAP: 3046 in CPQIDA.MIB]
Warning1216
Drive Array Spare Drive Status Change. The spare drive in %4, %5 has a new status
of %2.%n(Spare status values: 1=other, 2=invalid, 3=failed, 4=inactive,
5=building,6=active) %n [SNMP TRAP: 3047 in CPQIDA.MIB]
Warning1217
External Array Logical Drive Status Change. Logical drive number %5 on array "%4"
has a new status of %6.%n(Logical Drive status values: 1=other, 2=ok, 3=failed,
4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding, 8=wrongDrive,
9=badConnect, 10=overheating, 11=shutdown, 12=expanding, 13=notAvailable,
14=queuedForExpansion)%n [SNMP TRAP: 16022 in CPQFCA.MIB]
Error1145
External Array Physical Drive Status Change. The physical drive in port %5, bay %6
on array "%4" has a new status of %7.%n(Drive status values: 1=other, 2=unconfigured,
3=ok, 4=threshExceeded, 5=predictiveFailure, 6=failed)%n [SNMP TRAP: 16016 in
CPQFCA.MIB]
Error1146
External Array Spare Drive Status Change. The spare drive in port %5, bay %6 on
array "%4" has a new status of %7.%n(Spare status values: 1=other, 2=inactive, 3=failed,
4=building, 5=active)%n [SNMP TRAP: 16002 in CPQFCA.MIB]
Error1147
118 Management Agents Event Tables