Management Agents Events Reference

Event DescriptionEvent SeverityEvent ID
Debug: The Server SNMP Agent was unable to forward an SNMP trap to the Remote
Insight Board trap due to a processing error. The data contains the error code.
Warning1804
Component: Server SNMP Agent%n Error: The Server Agent service is not running.%n
Cause: The Server SNMP Agent has determined that the Server Agent service is not
running. Stop the SNMP service and restart the Server Agents service. If the error
persists, reinstalling the Management Agents may correct this error.
Warning1806
Debug: The Server SNMP Agent has determined that the Server Agents service is
running.
Informational1807
Component: Server SNMP Agent - Asynchronous Management%n Error: The agent
could not deliver trap %1.%n Cause: The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access
Service or by a missing or invalid configuration. Use the Management Agents control
panel to verify the Asynchronous Management configuration settings. Use the
Network control panel to verify the Remote Access configuration. If this error persists,
reinstalling the Management Agents or the Remote Access Service may correct this
error. For more information, refer to the Management Agents Asynchronous
Management documentation.
Informational1808
Storage Agent Events
Event DescriptionEvent
Severity
Event ID
Error: Unable to allocate memory. Cause: This indicates a low memory condition.
Rebooting the system will correct this error.
Warning512
Error: Could not read from the registry subkey. Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning513
Error: Could not write the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning514
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning515
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning516
Error: Could not read the registry subkey: "%1". Cause: This error can be caused by
a corrupt registry or a low memory condition. Rebooting the server may correct this
error.
Warning517
Error: Unsupported storage system. Cause: The Proliant storage system %1 is not
supported by this version of the Storage Agents. Upgrade the agents to the latest
version.
Warning526
The Drive Array Agent storage system table is full.Warning527
The Drive Array Agent failed to get capacity on SCSI drive because SCSI pass through
IOCTL failed.
Warning574
Drive Array Physical Drive Threshold Exceeded. The physical drive in slot %4, port
%5, bay %6 with serial number "%7", has exceeded a drive threshold.%n [SNMP
TRAP: 3030 in CPQIDA.MIB]
Error1061
116 Management Agents Event Tables