Installation (Smart Setup) Guide, Windows Server 2008 SP2, v6.5

Figure 2-9 EBSU Screen #3
23. Type install.cmd to begin.
24. Press the Esc + Tab keys to open a different command channel. Verify there are no error
messages in the SACSetupErr channel.
Figure 2-10 EBSU Screen #4
25. The system will restart during the installation. Wait until the EVENT: prompt displays, and
then type cmd.
26. Press Esc + Tab, and when prompted, enter the Administrator username and password.
Remember that passwords are case-sensitive.
Figure 2-11 EBSU Screen #5
27. Type hostname to display the hostname information (you will enter the hostname
information exactly as it appears, in the next step).
28. Type the following: wmic RDToggle where ServerName="hostname" call
SetAllowTSConnections 1
This command enables display of the remote desktop.
Install from a Headless Console 35