Installation (Smart Setup) Guide, Windows Server 2008 SP2, v6.5

Operating System Category
The Operating System category contains links that show basic operating system configuration,
usage, state, and other information. The Operating System category displays the following
information:
• Logical Disks: Information includes volume, free space, queue length, and disk busy time.
Network Category
The Network category contains links that display basic network system configuration, usage,
state, and other information. Information can describe a virtual NIC, a single NIC, or teams of
NICs. The information displayed depends on the type of NIC, and can include details about all
of the following:
• NIC controllers
• NIC interfaces
• Ethernet statistics
• Logical adapters
System Software Category
The System Software category contains links that display information about the software
distributor bundles and products, including patch products.
Storage Category
The Storage category contains links that show basic storage system configuration, usage, state,
and other information. Information displayed can include the following:
• File system space used
• SCSI disk information
• SCSI controller information
• Drive array controller information
• Fibre Channel storage information
• Fibre Channel tape controller information
• IDE controller information
• SAS host bus adapter information
NOTE: EMC, EVA, VA, and XP storage systems are not supported by WebAgents.
System Configuration Category
The System Configuration category displays the following information:
• Automatic Server Recovery: Provides Automatic Server Recovery (ASR) configuration
information and displays when the server was last reset.
• Cell Boards: Provides information about the cell board, including product name, ROM
version, power, number of CPUs in the cell, total cell memory, and CLM information.
• Partition Info: Provides information about the partition, including total number of active
CPUs, number of installed cells, number of powered on cells, number of ready-for-reconfigure
cells, partition name, root cell number, and total partition memory
• System Summary: Provides general information that includes system model name, operating
system, HP Insight Agents version, system UUID, bay number, blade size, system firmware
version, BMC firmware version, management processor firmware version, HPVM firmware
version, management processor host name, lights-out management processor IP address,
lights-out management processor home page URL, crash dump information, and current
and minimum paging file size.
Also provides system name, description, network management up time, contact information,
location, and IP address. Specifies power management state. Provides asset control
information that includes device serial number and asset tag. Provides firmware versions
including index, description, revision, location, and status.
100 SMH and the WBEM Providers