Installation Guide, Windows Server 2008 SP2 on HP Integrity Servers v7.1 (T2369-90031, March 2011)

Figure 2-2 EBSU OS Media Select Screen
NOTE: The steps that follow apply to users of Microsoft Windows OS media only. If you
are using HP Reinstall media, follow the next prompt to load Windows, then go to Step 12
in “Load the System Image to the Boot Disk” (page 45) and continue the rest of your
installation from there.
7. EBSU displays the firmware update screen, listing each device, its installed firmware version,
and the firmware version on the Smart Setup media. Select the firmware devices you want
to update. To continue, select Next, and press Enter.
Figure 2-3 EBSU Firmware Update Screen
Install from a Headless Console 31