Installation Guide, Windows Server 2008 R2 v7.0

Figure 2-9 EBSU Screen #3
NOTE: In BL860c i2/BL870c i2/BL890c i2/rx 2800 i2 server blades and not shown in the
above image, there are two more files (delthisvolume.cmd and readme1st.txt) and
two more directories ($WinPEDriver and data).
24. Type install.cmd to begin.
25. Press the Esc + Tab keys to open a different command channel. Verify there are no error
messages in the SACSetupErr channel.
Figure 2-10 EBSU Screen #4
26. The system will restart during the installation. Wait until the EVENT: prompt displays, and
then type cmd.
27. Press Esc + Tab, and when prompted, enter the Administrator username and password.
Remember that passwords are case-sensitive.
Figure 2-11 EBSU Screen #5
28. Type hostname to display the hostname information (you will enter the hostname
information exactly as it appears, in the next step).
Install from a Headless Console 37