Installation Guide, Windows Server 2008 R2 on HP Integrity Servers v7.1 (T2369-90032, March 2011)

Figure 2-24 Initial Configuration Tasks Screen
29. At this screen, you can set up and configure system-wide settings, and perform tasks such
as:
• Set time zone
• Configure networking
• Provide computer name and domain info
• Enable automatic updating and feedback
• Download and install updates
• Add roles
• Add features
• Enable Remote Desktop
• Configure Windows Firewall
You must configure some of these settings, to prepare your system for its intended use in
your production environment. However, it is beyond the scope of this document to make
specific recommendations, since each user has a unique combination of factors such as
system I/O, storage, intended use, and so on. See your System Administrator and the
operating system online help.
30. In BL8x0c i2 server blades and rx2800 i2 servers, navigate to the MSDATA partition, open
the file named readme1st.txt, and follow any directions given there.
NOTE: This step is optional. The MSDATA partition does not affect Windows usage. You
can delete it, if desired, to avoid confusion.
31. Installation of the OS is complete.
After installing the OS, perform these tasks next:
1. “Install the Integrity Support Pack (ISP)” (page 65)
2. “Activate the OS” (page 52)
Install from a GUI Console 47