Installation Guide, Windows Server 2008 R2 on HP Integrity Servers v7.1 (T2369-90032, March 2011)

Figure 2-10 EBSU Screen #1
NOTE: In BL8x0c i2 server blades and rx2800 i2 servers, there are two more files
(delthisvolume.cmd and readme1st.txt) and two more directories ($WinPEDriver
and data) not shown in the above image.
24. Type install.cmd to begin.
25. Press the Esc + Tab keys to open a different command channel. Verify there are no error
messages in the SACSetupErr channel.
Figure 2-11 EBSU Screen #2
26. The system will restart during the installation. Wait until the EVENT: prompt displays, and
then type cmd.
27. Press Esc + Tab, and when prompted, enter the Administrator username and password.
Remember that passwords are case-sensitive.
Figure 2-12 EBSU Screen #3
28. Type hostname to display the hostname information (you will enter the hostname
information exactly as it appears, in the next step).
38 Installing the OS