HP Insight Management WBEM Providers for Windows on Integrity Data Sheet

Smart Array 215
Table 15-12 Class: HPSA_StorageEnclosureProcessor (CIM_ComputerSystem)
Property name Property implementation
OperationalStatus[0,1, 2, 3 ] Operational status for enclosure and associated power
supplies, fans and sensors. The use of
OperationalStatus is described in the HP Storage
Enclosure Profile. Index values are populated as
follows:
• Index[0] – Enclosure status:
○ 0 (Unknown)
○ 2 (OK)
○ 3 (Degraded)
○ 6 (Error)
• Index[1] – Fan status (See Profile)
• Index[2] – Power Supply status (See Profile)
• Index[3] – Temp Sensor Status (See Profile)
Note: Operational status for Fan, Power, and Temp
Sensor are “not detected” for internal storage
enclosure(s) of the local controller(s) (PCI or
Embedded).
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_System
CreationClassName HPSA_StorageEnclosureProcessor
Name Opaque key
NameFormat Other
IdentifyingDescriptions[0] Other vendor-specific name
OtherIdentifyingInfo[0] Port Number:BoxNumber to which the enclosure is
attached (for example, 1E:1). For dual port SAS disks,
both port numbers are displayed.
CIM_ComputerSystem
Dedicated[0] 2 (Other)
OtherDedicatedDescriptions[0] SDE—Indicates storage device enclosure
HPSA_StorageEnclosureProcessor
15.3.12HPSA_PortController
HPSA_PortController represent the HBA in the host system. There is one instance per HBA. Note: This
class is not implemented for external subsystems (for example, MSA500).