HP Insight Management WBEM Providers for Windows on Integrity Data Sheet

Management Processor Lite 123
Table 9-2 Class: HP_ManagementProcessor
Property name Property implementation
StatusDescriptions Descriptive text per OperationalStatus.
• StatusDescriptions[0] text per
OperationalStatus[0]:
○ Management Processor Status: Unknown
○ Management Processor Status: OK
○ Management Processor Status: Degraded
○ Management Processor Status: Error
• StatusDescriptions[1] text per
OperationalStatus[1]:
○ Management Processor NIC Status: Unknown
○ Management Processor NIC Status: OK
○ Management Processor NIC Status: NIC is
disabled
○ Management Processor NIC Status: Not in use,
MP is utilizing host NIC
○ Management Processor NIC Status: NIC
disconnected
○ Management Processor NIC Status: NIC failed
• 0 (Unknown), when OperationalStatus[0]=0
(Unknown), or when software interface fails
HealthState
• 5 (OK), normal operation
• 10 (Degraded/Warning), when
OperationalStatus[0]=3 (Degraded)
• 20 (Major failure), when OperationalStatus[0]=6
(Error)
Note: When a Management Processor is disabled (see
the EnabledState property) HealthState always reports
a state of 5 (OK) so as not to contribute negatively to
overall system status. An MP is disabled only if the user
has manually disabled it via the MP RBSU settings or if
an embedded iLO or iLO2 has been superceded by the
an installed RILOE-II card; both of these are seen
as“normal conditions.
CIM_LogicalElement
CIM_EnabledLogicalElement
• 2 (Enabled) for active MP
EnabledState
• 3 (Disabled) for inactive/disabled MP
Note: The Active MP can be enabled or disabled (the
user can manually disable the MP via RBSU settings or
the MP might have been left in a disabled state after
removal of a RILOE-II card from the system). The
Inactive MP is always disabled
RequestedState 12 (Not Applicable)
EnabledDefault 2 (Enabled)
CIM_System