Failover Cluster Installation and Configuration Guide, Windows Server 2008 SP2 and Windows Server 2008 R2 SP1

6. Create the cluster.
a. From the Failover Cluster Management tool, select Create a Cluster.
b. Enter a Cluster Name. Only select the public network (with a check mark), and then
assign a unique IP address for the cluster. Finally, click Next to create the cluster.
Figure 2-8 Create Cluster Wizard window
c. After the cluster is created, make sure that the Public and Private networks are available,
and that all shared storage disks are visible in the Failover Cluster Management tool.
Figure 2-9 Failover Cluster Management window
Installing the Cluster 25