AB379A and AB379B HBA Installation Guide
Table Of Contents
- AB379A and AB379B PCI-X 2.0 dual-port 4Gb FC adapters for Itanium Linux and Windows installation guide
- HP StorageWorks
- About this guide.
- Intended audience
- Related documentation
- Document conventions and symbols
- HP technical support
- Helpful web sites
- Subscriptionservice
- 1 HBA features
- Performance specifications
- Environmental specifications
- Physical specifications
- 2 Installing the HBAs
- Installation prerequisites
- Installation procedure
- 3 Installing and configuring the Linux driver
- Prerequisites
- Installing the driver kit
- Using the RPM
- Installing the fibreutils RPM
- Changing driver parameters
- Proc file system support
- Configuring the HBAs
- Starting the Configuration protocol
- Using the Driver Configuration menu
- Troubleshooting Linux
- 4 Installing the Windows drivers.
- Prerequisites
- Installing drivers using the Smart Components
- Troubleshooting Windows
- Using the Event Viewer
- A Regulatory compliance and safety
- Declaration of conformity for products marked with the FCC logo, US only
- Laser device
- Laser safety warning
- Certification and classification informati
- Laser product label.
- International notices and statements
- Canadian notice (avis Canadien)
- European Union notice
- BSMI (Taiwan)
- Japanese notice
- Korean notice
- Electrostatic discharge
- Grounding methods
- Index.
A Regulatory compli a n c e an d
safety
Declaration of conformity for products marked wi th the FCC
logo, United States only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that m ay cause undesired operation. For questions regarding your
product, visit h
ttp://www.hp.com. For questions regarding this FCC declaration, contact us by mail or
telephone:
• Hewlett-Packard Company, P.O. Box 692000, Mailstop 510101 Houston, TX 77269–2000
• 1–281–514–3333
To identify this product, refer to the par t, Regulatory Model N umber, or product number found on the
product.
Laser device
All HP syst
ems equ ipped with a laser device comply with safety standards, including International
Electrote
chnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with
laser pro
duct performance standards set by government agencies as a Class1 laser product. The product
does
not emit hazardous light.
Laser safety warning
WARNING!
To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device other than
those
specified herein.
• Allow only HP-authorized service technicians to repair the laser device.
Certifi cation and classification information
This product contains a laser internal to the fiber o ptic (FO) transceiver for connection to the Fibre
Channel communications port.
In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained
in the De partment of Health and Human Services (DHHS) regulation 2 1 CFR, Subchapter J. A
label
on the plastic FO transceiver housing indicates the certification.
Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirem ents
contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996 and Amendment
2:2001.
AB379A and AB379B PCI-X 2.0 d ual-port 4Gb FC adapters for Itanium Linux and Windows installation
guide
23