Windows nPartition Guide v5.5
Table Of Contents
- nPartition Administrator's Guide
- Table of Contents
- 1 Introduction
- Quick Start
- Getting to know nPartitions
- Choosing a management tool
- Management interface options
- Choosing a management mode
- Setting up the management station
- Performing nPartition management tasks
- 2 Installing nPartition Management Utilities
- 3 Using Partition Manager
- 4 Using Other Tools to Manage nPartitions
- Complex-level tasks
- nPartition-level tasks
- Boot configuration options for nPartition systems
- Find bootable devices
- List nPartition configurations
- List the local (current) nPartition number
- List memory configurations
- Configure boot paths and options
- Configure autoboot options
- Configure boot-time system tests
- Boot Windows Server 2003
- Boot over a network
- Shut down Windows Server 2003
- Reboot and reset
- Reboot for reconfiguration
- Shut down to a shutdown for reconfig (inactive) state
- Boot an inactive nPartition
- Perform a transfer of control reset
- Create a Genesis Partition
- Create a new nPartition
- Remove (delete) an nPartition
- Add cells to an nPartition
- Set core cell choices
- Rename an nPartition
- Cell-level tasks
- Power-, status-, and hardware-level tasks
- List input/output (I/O) configurations
- List cabinets in a server complex
- List power status and power supplies
- List fan and blower status
- Turn attention indicators (LEDs) on and off
- Power server cabinets on and off
- Power cells and I/O chassis on and off
- Configure and deconfigure cells
- Configure and deconfigure processors (CPUs)
- Configure and deconfigure memory (DIMMs)
- 5 nPartition Commands Reference
- 6 Troubleshooting
- Installation problems
- Checking component installation and operation
- Operational problems
- All commands: ordinal not found
- All commands: required data unavailable or locked
- Fruled: LED error messages (mid-range servers only)
- Frupower: cannot power off error
- Parcreate and parmodify: cell local memory warnings
- Parcreate, parmodify, and parremove: failure to update stable complex configuration data (SCCD)
- Parremove: shutdown and reset instructions
- Parstatus -c -V: apparent incorrect output
- Parstatus -p -V: apparent incorrect output
- Parstatus: local partition error
- Parstatus: unable to get read lock error
- Using WMIOP.EXE to pinpoint problems
- Error messages and corrective actions
- Index

Table of Contents
1 Introduction...................................................................................................................11
Quick Start............................................................................................................................................11
Getting to know nPartitions..................................................................................................................12
Partitioning continuum...................................................................................................................12
Cell structure of nPartitions.............................................................................................................12
Properties of nPartitions..................................................................................................................13
Cell and nPartition boot process......................................................................................................14
Cell boot phase ..........................................................................................................................14
nPartition boot phase.................................................................................................................15
Choosing a management tool...............................................................................................................15
Management interface options.............................................................................................................16
Intelligent Platform Management Interface (IPMI).........................................................................16
IPMI Block Transfer (IPMI BT)...................................................................................................16
IPMI over LAN...........................................................................................................................16
Managing nPartitions using IPMI over LAN.............................................................................17
Running Partition Manager using IPMI over LAN..............................................................17
Running nPartition commands using IPMI over LAN.........................................................18
Web-Based Enterprise Management (WBEM)................................................................................18
Securing the WBEM connection.................................................................................................18
Managing nPartitions using WBEM..........................................................................................19
Running Partition Manager using WBEM............................................................................19
Running nPartition commands using WBEM......................................................................19
Choosing a management mode............................................................................................................19
Local management...........................................................................................................................20
Remote management using IPMI....................................................................................................20
Remote management using WBEM.................................................................................................21
Authentication and authorization issues........................................................................................21
Local management.....................................................................................................................21
Remote management using IPMI...............................................................................................22
Remote management using WBEM...........................................................................................22
Setting up the management station......................................................................................................22
Controlling the management station remotely...............................................................................23
Remote Control..........................................................................................................................23
Terminal Services.......................................................................................................................23
Remote Desktop.........................................................................................................................23
Telnet..........................................................................................................................................23
Performing nPartition management tasks............................................................................................24
Listing the status of an nPartition or complex................................................................................24
Using the Partition Manager......................................................................................................24
Using the nPartition commands.................................................................................................24
Using the Management Processor Command menu.................................................................25
Using the EFI Shell.....................................................................................................................25
Creating nPartitions.........................................................................................................................25
Creating the first nPartition in a server complex.......................................................................25
Creating a Genesis Partition for a server complex.....................................................................25
Creating additional nPartitions in a server complex.................................................................25
Modifying nPartitions......................................................................................................................26
Booting and resetting nPartitions....................................................................................................27
Using the MP Command menu.................................................................................................28
Using the EFI Shell.....................................................................................................................28
Using Microsoft Windows commands.......................................................................................28
Table of Contents 3