Windows nPartition Guide v5.5
Table Of Contents
- nPartition Administrator's Guide
- Table of Contents
- 1 Introduction
- Quick Start
- Getting to know nPartitions
- Choosing a management tool
- Management interface options
- Choosing a management mode
- Setting up the management station
- Performing nPartition management tasks
- 2 Installing nPartition Management Utilities
- 3 Using Partition Manager
- 4 Using Other Tools to Manage nPartitions
- Complex-level tasks
- nPartition-level tasks
- Boot configuration options for nPartition systems
- Find bootable devices
- List nPartition configurations
- List the local (current) nPartition number
- List memory configurations
- Configure boot paths and options
- Configure autoboot options
- Configure boot-time system tests
- Boot Windows Server 2003
- Boot over a network
- Shut down Windows Server 2003
- Reboot and reset
- Reboot for reconfiguration
- Shut down to a shutdown for reconfig (inactive) state
- Boot an inactive nPartition
- Perform a transfer of control reset
- Create a Genesis Partition
- Create a new nPartition
- Remove (delete) an nPartition
- Add cells to an nPartition
- Set core cell choices
- Rename an nPartition
- Cell-level tasks
- Power-, status-, and hardware-level tasks
- List input/output (I/O) configurations
- List cabinets in a server complex
- List power status and power supplies
- List fan and blower status
- Turn attention indicators (LEDs) on and off
- Power server cabinets on and off
- Power cells and I/O chassis on and off
- Configure and deconfigure cells
- Configure and deconfigure processors (CPUs)
- Configure and deconfigure memory (DIMMs)
- 5 nPartition Commands Reference
- 6 Troubleshooting
- Installation problems
- Checking component installation and operation
- Operational problems
- All commands: ordinal not found
- All commands: required data unavailable or locked
- Fruled: LED error messages (mid-range servers only)
- Frupower: cannot power off error
- Parcreate and parmodify: cell local memory warnings
- Parcreate, parmodify, and parremove: failure to update stable complex configuration data (SCCD)
- Parremove: shutdown and reset instructions
- Parstatus -c -V: apparent incorrect output
- Parstatus -p -V: apparent incorrect output
- Parstatus: local partition error
- Parstatus: unable to get read lock error
- Using WMIOP.EXE to pinpoint problems
- Error messages and corrective actions
- Index
Classes in namespace [root/cimv2/npar]:
__SystemClass
__NAMESPACE
__Provider
__Win32Provider
HP_DecoupledProvider
__ProviderRegistration
__ObjectProviderRegistration
__InstanceProviderRegistration
__ClassProviderRegistration
__PropertyProviderRegistration
__MethodProviderRegistration
__EventProviderRegistration
__EventConsumerProviderRegistration
__CIMOMIdentification
__IndicationRelated
__Event
__ExtrinsicEvent
__SystemEvent
__EventDroppedEvent
__EventQueueOverflowEvent
__ConsumerFailureEvent
__NamespaceOperationEvent
__NamespaceCreationEvent
__NamespaceDeletionEvent
__NamespaceModificationEvent
__ClassOperationEvent
__ClassCreationEvent
__ClassDeletionEvent
__ClassModificationEvent
__InstanceOperationEvent
__InstanceCreationEvent
__InstanceDeletionEvent
__InstanceModificationEvent
__TimerEvent
__AggregateEvent
__EventConsumer
__EventFilter
__FilterToConsumerBinding
__EventGenerator
__TimerInstruction
__AbsoluteTimerInstruction
__IntervalTimerInstruction
__TimerNextFiring
__NotifyStatus
__ExtendedStatus
__SecurityRelatedClass
__NTLMUser9X
__PARAMETERS
__SystemSecurity
CIM_ManagedElement
CIM_ManagedSystemElement
CIM_LogicalElement
HP_NParSlot
HP_NParCellSlot
HP_NParIOChassisSlot
HP_NParCabinet
HP_NParPowerCoolingDomain
HP_NParPotentialErrorObject
HP_NParComponent
HP_NParCell
HP_NParIOChassis
HP_NParProfile
HP_NParComplex
HP_NParPartition
110 Troubleshooting