U320 Installation Guide

Updating the EFI Driver
If you select an EFI driver file from the Select Firmware Image menu, (such as lsimpt.rom in
Example 5-5), then press Enter, a confirmation screen appears:
You are about to install EFI Driver version 1.04.02.00
Do you want to proceed? (y/n)
If you press y, a status screen appears, displaying the progress of the operation. For example:
Installing EFI Driver Image for Seg:00 Bus:80 Dev:01
Percentage Completed - 100%
Re-initializing controller...
This operation may take up to one minute.
Firmware Image Installation successful for Seg:00 Bus:80 Dev:01
Updating Vital Product Data (VPD)...Done
Updated Seg:00 Bus:80 Dev:01 to EFI Driver Version 1.04.02.00
Press any key to continue
Press any key to return to the main menu.
Exiting the EFI Utility
To exit the pscsi EFI Utility and return to the EFI shell prompt, choose Exit Application from
the Main Menu, then press Enter.
If you have updated the EFI driver, the follow screen appears:
Updating the EFI Driver Image requires a system reset
for the new EFI Driver to take effect.
Do you want to reset the system now? (y/n)
You must press y to reset the system in order to complete the new EFI driver installation.
Using the EFI Utility on HP Integrity Systems 29