Smart Array Internal Cabling Guide

Cabling for the HP Integrity rx7640 Server
Recabling for RAID
Chapter 5
46
• The bottom right hard drive has a SCSI connector cabled to Core I/O slot 8 cell 0 LAN SCSI card.
To use RAID with your hot plug drives, you must reconfigure the internal SCSI cables as instructed and use
the Cable kit (A7027-63001). Follow the instruction below for the configuration you are installing.
Single Partition Configuration
Figure 5-1 shows the correct cabling for a single partition configuration, as viewed from the front of the
server.
Figure 5-1 Single Partition RAID Cabling